TEXAS Manuals (Industrial)

This document describes the SN54HC03 and SN74HC03 quadruple 2-input positive-NAND gates. These devices have open-drain outputs and require pullup resistors to work correctly. They can be connected to other open-drain outputs to implement active-low wired-OR or active-high wired-AND functions.

File format: PDF Size:67 KB

This document introduces the features and characteristics of the SN74AUC2G53 single-pole double-throw (SPDT) analog switch or 2:1 analog multiplexer/demultiplexer. This switch is operational at 0.8 V to 2.7 V, and has low power consumption, high on-off output voltage ratio, high degree of linearity, and high ESD protection performance.

File format: PDF Size:311 KB

SN74AUC2G02 is a dual 2-input positive-NOR gate, designed for 1.8V operation and capable of supporting mixed-mode signal operation. It features low power consumption, high output drive, over 100mA latch-up performance, and over 2000V ESD protection.

File format: PDF Size:245 KB

SN54ALS244C, SN54AS244A, SN74ALS244C, SN74AS244A are octal buffers and line drivers with 3-state outputs manufactured by Texas Instruments.

File format: PDF Size:513 KB

The SN54ABT16245A and SN74ABT16245A are 16-bit noninverting 3-state transceivers designed for synchronous two-way communication between two logic systems.

File format: PDF Size:174 KB

SLLS562C is a half-duplex transceiver designed for RS-485 data bus networks by TI company. This transceiver has low quiescent power, 1/8 unit load, industrial standard SN75176 footprint, failsafe receiver, etc. It is suitable for energy meter networks, motor control, power inverters, industrial automation, building automation networks, battery-powered applications, telecommunications equipment and other application scenarios

File format: PDF Size:365 KB

SN55109A, SN55110A, SN75109A, SN75110A, and SN75112 are dual line drivers with improved output current regulation and stability over supply voltage and temperature ranges, constant-current outputs, high speed, standard supply voltages, high output impedance, high common-mode output voltage range, TTL-input compatibility, inhibitor available for driver selection, glitch-free during power up/power down. SN75112 and external circuit meet or exceed the requirements of CCITT Recommendation V.35.

File format: PDF Size:162 KB

The MSC121X series is a low-power, high-precision, high-performance MCU and A/D converter hybrid module that can be used for various digital signal processing applications. The MSC121X series includes five products: MSC1210, MSC1211, MSC1212, MSC1213 and MSC1214. They are different in the number and precision of the built-in A/D converters. MSC121X series adopts 8051 compatible MCU core, with up to 40MHz operating speed, which can meet the needs of various digital signal processing applications. MSC121X series also has 32kB flash memory, 1280 bytes of data SRAM, 2KB boot ROM and 16 interrupt sources, which can meet the storage and interrupt requirements of various applications. MSC121X series adopts 34 I/O pins, which can connect various peripheral devices. MSC121X series has low power consumption characteristics, in idle mode current consumption is less than 200µA, in stop mode current consumption is less than 100nA. MSC121X series also has programmable brownout reset and programmable low voltage detection function, which can improve the reliability of the system.

File format: PDF Size:924 KB

The MAX3223 is an RS-232 bus-pin ESD protection device that exceeds ±15 kV ESD protection using the Human-Body Model (HBM). It meets or exceeds the requirements of TIA/EIA-232-F and ITU v.28 standards. The device operates with a 3V to 5.5V VCC supply and supports data signaling rates up to 250 kbit/s. It features two drivers and two receivers, low standby current, and is suitable for applications such as battery-powered systems, PDAs, notebooks, laptops, palmtop PCs, and hand-held equipment.

File format: PDF Size:289 KB

The MSP430F1xx series is a low-power microcontroller produced by Texas Instruments, USA. It has a low supply voltage range, ultra-low power consumption, five power-saving modes, a 16-bit RISC architecture, a 125 ns instruction cycle time, three-channel internal DMA, a 12-bit A/D converter, 16-bit timers, serial communication interfaces, a power supply voltage monitor/monitor, serial on-board programming, etc.

File format: PDF Size:1155 KB

This document describes the features and characteristics of the SPRS078F model product, including an advanced multibus architecture with three separate 16-bit data memory buses and one program memory bus, as well as a 40-bit arithmetic logic unit (ALU) and two independent 40-bit accumulators.

File format: PDF Size:790 KB

TMS320C1x digital signal processors are products produced by Texas Instruments. This product has excellent performance and has 32-bit ALU/Accumulator, 16×16-Bit Multiplier With a 32-Bit Product, 0 to 16-Bit Barrel Shifter, Eight Input/Output Channels, Dual-Channel Serial Port, Simple Memory and I/O Interface and other features

File format: PDF Size:1057 KB

This datasheet introduces the features and characteristics of TLV1393 and TLV2393 dual bipolar comparators. They are built using a new Texas Instruments low-voltage, high-speed bipolar process, and are specifically designed for low-voltage, single-supply applications. TLV1393 is ideal for low-power systems, with its typical supply current of only 0.16 mA and improved response time of 0.7 µs. TLV2393 features excellent AC performance with a response time of just 0.45 µs, three times that of the LM393. These devices are available in TSSOP packages, which are 1.1 mm thick and 25% smaller than standard surface-mount packages, making them ideal for high-density circuits, especially in hand-held and portable equipment.

File format: PDF Size:235 KB

The TPS3808xxx family is a microprocessor supervisory circuit with low quiescent current and programmable delay feature. It monitors system voltages and generates an open drain reset signal when the voltage drops below a preset threshold or when the manual reset pin goes low.

File format: PDF Size:281 KB

The first members of TI's new BiMOS general-purpose operational amplifier family are the TLC07x. The BiMOS family concept is simple: provide an upgrade path for BiFET users who are moving away from dual-supply to single-supply systems and demand higher ac and dc performance. With performance rated from 4.5 V to 16 V across commercial (0°C to 70°C) and an extended industrial temperature range (-40°C to 125°C), BiMOS suits a wide range of audio, automotive, industrial and instrumentation applications. Familiar features like offset nulling pins, and new features like MSOP PowerPAD packages and shutdown modes, enable higher levels of performance in a variety of applications.

File format: PDF Size:1413 KB

16-Bit, Dual Voltage Output DIGITAL-TO-ANALOG CONVERTER DATA SHEET

File format: PDF Size:761 KB

The CC2400 is a true single-chip 2.4 GHz RF transceiver designed for low-power and low-voltage wireless applications. The RF transceiver is integrated with a baseband modem supporting data rates up to 1 Mbps. The CC2400 is a low-cost, highly integrated solution enabling robust wireless communication in the 2.4 - 2.4835 GHz unlicensed ISM band. It is intended for systems compliant with world-wide regulations covered by EN 300 440 (Europe), CFR47 Part 15 (US) and ARIB STD-T66 (Japan). Targeting a wide range of applications at 2.4 GHz, the CC2400 supports over-the-air data rates of 10 kbps, 250 kbps and 1 Mbps without requiring any modifications to the hardware. The CC2400 provides extensive hardware support for packet handling, data buffering, burst transmissions, data coding and error detection reducing the workload on the host microcontroller. The main operating parameters of CC2400 can be programmed via an SPI-bus. In a typical system CC2400 will be used together with a microcontroller and a few external, passive components. CC2400 is based on Chipcon’s SmartRF-03 technology in 0.18 µm CMOS.

File format: PDF Size:965 KB

The DAC7512 is a low-power, single, 12-bit buffered voltage output Digital-to-Analog Converter (DAC). Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7512 uses a versatile three-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, Microwire™, and DSP interfaces. The reference for the DAC7512 is derived from the power supply, resulting in the widest dynamic output range possible. The DAC7512 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place in the device. The DAC7512 contains a power-down feature, accessed over the serial interface, that can reduce the current consumption of the device to 50nA at 5V. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 0.7mW at 5V reducing to 1µW in power-down mode. The DAC7512 is available in a SOT23-6 package and an MSOP-8 package.

File format: PDF Size:901 KB

The TPS40195 is a flexible synchronous buck controller that operates from a nominal 4.5 V to 20 V supply. This controller implements voltage mode control with the switching frequency adjustable from 100 kHz to 600 kHz. Flexible features found on this device include selectable soft-start time, programmable short circuit limit, programmable undervoltage lockout (UVLO) and synchronization capability.

File format: PDF Size:1091 KB

The ADS1212 and ADS1213 are precision, wide dynamic range, delta-sigma Analog-to-Digital (A/D) converters with 24-bit resolution operating from a single +5V supply. The differential inputs are ideal for direct connection to transducers or low-level voltage signals. The delta-sigma architecture is used for wide dynamic range and to ensure 22 bits of no-missing-code performance. An effective resolution of 20 bits is achieved through the use of a very low-noise input amplifier at conversion rates up to 10Hz. Effective resolutions of 16 bits can be maintained up to a sample rate of 1kHz through the use of the unique Turbo Modulator mode of operation. The dynamic range of the converters is further increased by providing a low-noise programmable gain amplifier with a gain range of 1 to 16 in binary steps. The ADS1212 and ADS1213 are designed for high-resolution measurement applications in smart transmitters, industrial process control, weigh scales, chromatography and portable instrumentation. Both converters include a flexible synchronous serial interface that is SPI compatible.

File format: PDF Size:1183 KB