TEXAS Manuals (Industrial)

This data sheet mainly introduces SN74C130A datasheet, including product features, performance parameters, package and other information.

File format: PDF Size:414 KB

The SN74ALVCH168663 is an 18-bit bus transceiver designed for 1.65-V to 3.6-V VCC operation. It is characterized by ESD protection, bus hold on data inputs, and low power consumption.

File format: PDF Size:116 KB

The SN74ALVCH162601 is a 18-bit universal bus transceiver that combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, and clock-enabled modes.

File format: PDF Size:150 KB

SN54AHCT373 and SN74AHCT373 are octal-transparent D-type latches with 3-state outputs. They have TTL-voltage compatible inputs, excellent latch-up performance, and ESD protection.

File format: PDF Size:514 KB

File format: PDF Size:0 KB

The SN65MLVD200, SN65MLVD202, SN65MLVD204, and SN65MLVD205 are low-voltage differential 30-ohm line drivers and receivers for signaling rates up to 100 Mbps. These devices meet or exceed the current revision of the M-LVDS standard TIA/EIA-899 for Multipoint Data Interchange.

File format: PDF Size:334 KB

The SN100KT5539 is an octal ECL-to-TTL translator with open-collector outputs. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented functions such as memory-address drivers, clock drivers, and bus-oriented receivers and transmitters while eliminating the need for three-state overlap protection. Two pins OE1 and OE2 are provided for output-enable control. These control inputs are ANDed together with OE1 being ECL-compatible and OE2 being TTL-compatible. This offers the choice of controlling the outputs of the device from either a TTL or ECL signal environment. The SN100KT5539 is characterized for operation from 0°C to 85°C.

File format: PDF Size:87 KB

This document introduces the TMS320C1x series of digital signal processors, including performance, memory, peripherals, and packaging.

File format: PDF Size:1085 KB

This is the user manual for the Texas Instruments TravelMate 3000 WinSX notebook computer

File format: PDF Size:1171 KB

This document describes multiple models of octal bus transceivers and registers, including SN54ALS652, SN54ALS653, SN54AS651, SN54AS652, SN74ALS651A, SN74ALS652A, SN74ALS653, SN74ALS654, SN74AS651, and SN74AS652. These devices have independent registers and enables for A and B buses, allowing multiplexed transmission of real-time and stored data. Users can choose between true or inverting data paths, as well as 3-state or open-collector outputs to the A bus. The document also mentions different package options.

File format: PDF Size:307 KB

This datasheet provides detailed information about the SN54F10 and SN74F10 triple 3-input positive-NAND gates. They operate over the full military temperature range of -55°C to 125°C and from 0°C to 70°C respectively.

File format: PDF Size:69 KB

SN54AHCT00 and SN74AHCT00 are quadruple 2-input positive NAND gates. They are fabricated using the EPIC (Enhanced-Performance Implanted CMOS) process and have TTL-voltage compatible inputs. The devices exhibit latch-up performance exceeding 250 mA per JESD 17 and ESD protection exceeding 2000 V per MIL-STD-883. They are available in various package options.

File format: PDF Size:81 KB

SN54AHC32, SN74AHC32 are Texas Instruments quadruple 2-input positive-OR gates, SN54AHC32 is characterized for operation over the full military temperature range of -55°C to 125°C, SN74AHC32 is characterized for operation from -40°C to 85°C

File format: PDF Size:85 KB

XIO2001 is a PCI Express™ to PCI bus translation bridge with various features and characteristics.

File format: PDF Size:1279 KB

The TS3USB31 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (750 MHz) of this switch allows signals to pass with minimum edge and phase distortion. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps).

File format: PDF Size:861 KB

The TS3USB30 is a high-bandwidth switch chip designed by TI company. It is mainly used in mobile phones, digital cameras, notebooks and other consumer electronic devices to realize the switching of USB 1.0, 1.1 and 2.0 signals. The TS3USB30 has a bandwidth of up to 750 MHz, which can realize fast signal transmission with low crosstalk and noise.

File format: PDF Size:776 KB

The TPS2149 is an integrated power management solution for USB bus-powered hubs that provides a 3.3V regulated output for the USB controller and two high-side MOSFET switches to power the downstream ports. The TPS2149 has independent logic enables that are compatible with both 5V and 3V logic.

File format: PDF Size:729 KB

File format: PDF Size:0 KB

This document is the datasheet for TI's TPS2145 and TPS2147 products. It introduces the characteristics of the two products, including the application scenarios, working principles, electrical characteristics, etc.

File format: PDF Size:1183 KB

This data sheet provides detailed information about the SN74GTLPH1612 18-BIT LVTTL-TO-GTL+ ADJUSTABLE-EDGE-RATE UNIVERSAL BUS TRANSCEIVER, including features, pins, package, and applications.

File format: PDF Size:168 KB