TEXAS Manuals (Industrial)

File format: PDF Size:0 KB

This document describes the features and characteristics of the TPS23754/6 high power/high efficiency PoE interface and DC/DC controller, including support for multiple input voltage and power source options, complete PoE interface, hardware classification compatible with high-power midspan power sourcing equipment, adapter ORing support, etc.

File format: PDF Size:1707 KB

The product is a low-power stereo audio codec with a stereo headphone amplifier, as well as multiple inputs and outputs, programmable in single-ended or fully-differential configurations.

File format: PDF Size:1429 KB

The ADS7845 is a 12-bit sampling analog-to-digital converter (ADC) with a synchronous serial interface and low on-resistance switches for driving touch screens. Typical power dissipation is 750µW at a 125kHz throughput rate and a +2.7V supply. The reference voltage (VREF) can be varied between 1V and +VCC, providing a corresponding input voltage range of 0V to VREF. The device includes a shutdown mode which reduces typical power dissipation to under 0.5µW. The ADS7845 is guaranteed down to 2.7V operation. Low power, high speed, and on-board switches make the ADS7845 ideal for battery-operated systems such as personal digital assistants with resistive touch screens and other portable equipment. The ADS7845 is available in a 16-lead SSOP package and is guaranteed over the –40°C to +85°C temperature range.

File format: PDF Size:318 KB

The CC2500 is a low cost true single chip 2.4 GHz transceiver designed for very low power wireless applications. It is intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band at 2400-2483.5 MHz. It is suitable for systems such as consumer electronics, wireless game controllers, wireless audio and wireless keyboard and mouse.

File format: PDF Size:992 KB

The CC2550 is a low cost true single chip 2.4 GHz transmitter designed for very low power wireless applications. The circuit is intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band at 2400-2483.5 MHz. The RF transmitter is integrated with a highly configurable baseband modulator which has a configurable data rate up to 500 kbps. Performance can be increased by enabling a Forward Error Correction option, which is integrated in the modulator. The CC2550 provides extensive hardware support for packet handling, data buffering and burst transmissions. The main operating parameters and the 64-byte transmit FIFO of CC2550 can be controlled via an SPI interface. In a typical system, the CC2550 will be used together with a micro-controller and a few passive components. CC2550 is part of Chipcon’s 4th generation technology platform based on 0.18 µm CMOS technology. This data sheet contains preliminary data, and supplementary data will be published at a later date. Chipcon reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. The product is not fully qualified at this point.

File format: PDF Size:708 KB

The THS4031 and THS4032 are ultralow-voltage noise, high-speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communication and imaging. The single-amplifier THS4031 and the dual-amplifier THS4032 offer very good ac performance with 100-MHz bandwidth, 100-V/µs slew rate, and 60-ns settling time (0.1%). The THS4031 and THS4032 are stable at gains of 2 (–1) or greater. These amplifiers have a high drive capability of 90 mA and draw only 8.5-mA supply current per channel. With total harmonic distortion (THD) of –72 dBc at f = 1 MHz, the THS4031 and THS4032 are ideally suited for applications requiring low distortion.

File format: PDF Size:675 KB

SLLS177G is a programmable auto-RTS and auto-CTS device with multiple modes and features. It supports CTS control of the transmitter and RTS control of the RCV FIFO contents and threshold. It can directly drive an RJ11 cable and is compatible with existing TL16C450 software. The device operates at high clock rates and has a programmable baud rate generator for high-speed operation. It also features complete status reporting capabilities and programmable serial interface characteristics.

File format: PDF Size:572 KB

TL16C750 is a 64-byte FIFO and auto-flow control asynchronous communications element produced by Texas Instruments.

File format: PDF Size:475 KB

This document is about TLC2272 and TLC2274 datasheet, introduces the features and characteristics of the two devices.

File format: PDF Size:1296 KB

The LM101A, LM201A, and LM301A are high-performance operational amplifiers featuring very low input bias current and input offset voltage and current to improve the accuracy of high-impedance circuits using these devices. The high common-mode input voltage range and the absence of latch-up make these amplifiers ideal for voltage-follower applications. The devices are protected to withstand short circuits at the output. The external compensation of these amplifiers allows the changing of the frequency response (when the closed-loop gain is greater than unity) for applications requiring wider bandwidth or higher slew rate. A potentiometer may be connected between the offset-null inputs (N1 and N).

File format: PDF Size:74 KB

This document describes the features and characteristics of the SCES337G model. The product supports 2V to 5.5V VCC operation and has low output ground bounce and high output VOH undershoot. The outputs are disabled during power up and power down with inputs tied to VCC. The product supports mixed-mode voltage operation on all ports and has latch-up performance exceeding 100mA and ESD protection exceeding 2000V.

File format: PDF Size:303 KB

This document contains packaging information and orderable device status for supplier 74365. The document lists detailed information about different models of the product, including package type, number of pins, package quantity, etc.

File format: PDF Size:664 KB

SCHS122G is a digitally controlled analog switch developed by Harris Semiconductor. It uses silicon gate CMOS technology and operates in a similar way to LSTTL, with low power consumption. The switch voltage range is 0V to 10V, and the load voltage range is ±5V. It has low resistance, low crosstalk, and fast switching.

File format: PDF Size:332 KB

This data sheet is applicable to CD54/74AC299, CD74AC323, CD54/74ACT299, and CD54ACT323. The CD54AC323 and CD74ACT323 were not acquired from Harris Semiconductor. Data sheet acquired from Harris Semiconductor SCHS288.

File format: PDF Size:433 KB

This document is a typical application description of the bq2420x series, which details the product's features and characteristics.

File format: PDF Size:512 KB

The document describes the features and characteristics of the TPS68000 highly efficient phase shift full bridge CCFL controller, including input voltage range, full bridge topology with integrated gate drives, synchronizable constant frequency operation, etc.

File format: PDF Size:871 KB

The document describes a product called TPS54620, which is a full-featured 17V, 6A synchronous step-down converter. It features high efficiency, integrated high-side and low-side MOSFETs, adjustable input undervoltage lockout, and support for SwitcherPro™ software tool.

File format: PDF Size:1747 KB

The TPS2375/77 is TI’s second generation IEEE 802.3af PoE powered device controller with 100-V ratings and a 0.58-Ω low-side switch. It integrates all the necessary features to develop a compliant powered device (PD).

File format: PDF Size:454 KB

The document describes the features of OPA604, including low distortion, low noise, high slew rate, wide gain-bandwidth, etc. It also provides information about the applications and description of the product.

File format: PDF Size:819 KB