ON Manuals (Industrial)

The MC14017B is a five-stage Johnson decade counter with built-in code converter. High speed operation and spike-free outputs are obtained by use of a Johnson decade counter design. The ten decoded outputs are normally low, and go high only at their appropriate decimal time period. The output changes occur on the positive-going edge of the clock pulse. This part can be used in frequency division applications as well as decade counter or decimal decode display applications.

File format: PDF Size:124 KB

MC1403 is a precision band-gap voltage reference designed for critical instrumentation and D/A converter applications. This unit is designed to work with D/A converters, up to 12 bits in accuracy, or as a reference for power supply applications. The output voltage is 2.5V with a range of ±25mV, input voltage range is 4.5V to 40V, quiescent current is 1.2mA typical, output current is 10mA, and temperature coefficient is 10ppm/°C typical. It is suitable for voltage reference for 8 to 12 Bit D/A converters, low TC Zener replacement, high stability current reference, and voltmeter system reference.

File format: PDF Size:89 KB

This document describes the features and characteristics of the MBRM130L Surface Mount Schottky Power Rectifier POWERMITE® Power Surface Mount Package. It utilizes the Schottky Barrier principle and has an optimized forward voltage drop and reverse current tradeoff. The advanced packaging techniques make it a highly efficient micro miniature, space-saving surface mount Rectifier. With its unique heatsink design, the Powermite® has the same thermal performance as the SMA while being 50% smaller in footprint area, and delivering one of the lowest height profiles, < 1.1 mm in the industry. Because of its small size, it is ideal for use in portable and battery-powered products such as cellular and cordless phones, chargers, notebook computers, printers, PDAs, and PCMCIA cards. Typical applications are AC-DC and DC-DC converters, reverse battery protection, and “ORing” of multiple supply voltages and any other application where performance and size are critical.

File format: PDF Size:64 KB

This datasheet provides information about MBRD1035CTL, including features, pins, package, and applications.

File format: PDF Size:68 KB

MC3479 is designed to drive a two−phase stepper motor in the bipolar mode.

File format: PDF Size:98 KB

The NTD4804N/D is a N-channel power MOSFET with a maximum voltage of 30V and a maximum current of 117A. It is mainly used in CPU power delivery, DC-DC converters and low side switching.

File format: PDF Size:81 KB

NCP5010 500mW White LED Boost Converter

File format: PDF Size:175 KB

The NTD78N03 is a power MOSFET from Semiconductor Components Industries, LLC. It features low RDS(on), optimized gate charge and lead-free packages are available. It can be used in desktop VCORE, DC-DC converters and low side switch applications.

File format: PDF Size:82 KB

File format: PDF Size:0 KB

MMFT960T1 is a N channel Power MOSFET with a maximum voltage of 60V and a maximum current of 300mA. It is packaged in SOT-223.

File format: PDF Size:59 KB

MC74HC04A is a high-performance hex inverter with six three-stage inverters. It can drive 10 LSTTL loads and directly interface with CMOS, NMOS, and TTL. It operates in a voltage range of 2.0 to 6.0V and has low input current and high noise immunity characteristics.

File format: PDF Size:70 KB

The NB6N11S is a 3.3 V 1:2 AnyLevel input to LVDS Fanout Buffer / Translator from ON Semiconductor. It can accept LVPECL, CML, LVCMOS, LVTTL or LVDS AnyLevel input signals and translate them to LVDS output signals. Two identical copies of Clock or Data will be distributed with a maximum working frequency of 2.0 GHz or 2.5 Gb/s respectively. The NB6N11S is ideal for SONET, GigE, Fiber Channel, Backplane and other Clock or Data distribution applications.

File format: PDF Size:112 KB

MC14043B/D is a CMOS MSI Quad R−S Latches produced by Semiconductor Components Industries, LLC. It has the characteristics of Double Diode Input Protection, Three−State Outputs with Common Enable, Outputs Capable of Driving Two Low−power TTL Loads or One Low−Power Schottky TTL Load Over the Rated Temperature Range, Supply Voltage Range = 3.0 Vdc to 18 Vdc, Pb−Free Packages are Available.

File format: PDF Size:98 KB

The MC34163 series are monolithic power switching regulators that contain the primary functions required for dc-to-dc converters. This series is specifically designed to be incorporated in step-up, step-down, and voltage-inverting applications with a minimum number of external components. These devices consist of two high gain voltage feedback comparators, temperature compensated reference, controlled duty cycle oscillator, driver with bootstrap capability for increased efficiency, and a high current output switch. Protective features consist of cycle-by-cycle current limiting, and internal thermal shutdown. Also included is a low voltage indicator output designed to interface with microprocessor based systems. These devices are contained in a 16 pin dual-in-line heat tab plastic package for improved thermal conduction. Output Switch Current in Excess of 3.0 A, Operation from 2.5 V to 40 V Input, Low Standby Current, Precision 2% Reference, Controlled Duty Cycle Oscillator, Driver with Bootstrap Capability for Increased Efficiency, Cycle-by-Cycle Current Limiting, Internal Thermal Shutdown Protection, Low Voltage Indicator Output for Direct Microprocessor Interface, Heat Tab Power Package, Moisture Sensitivity Level (MSL) Equals 1.

File format: PDF Size:251 KB

MC10EP195/D is a 3.3V ECL programmable delay chip produced by Semiconductor Components Industries, LLC, which is mainly used for clock deskewing and timing adjustment.

File format: PDF Size:220 KB

MC74HC32A is a quad 2-input OR gate produced by ON Semiconductor. It has good noise immunity and can be directly interfaced with CMOS, NMOS and TTL.

File format: PDF Size:85 KB

MC74HC139A is a dual 1-4 decoder/demultiplexer that utilizes high-performance silicon-gate CMOS technology. It features strong output drive capability, direct interface with CMOS, NMOS, and TTL, and wide operating voltage range.

File format: PDF Size:110 KB

The NE570 is a versatile low-cost dual gain control circuit in which either channel may be used as a dynamic range compressor or expander. Each channel has a full-wave rectifier to detect the average value of the signal, a linearized temperature-compensated variable gain cell, and an operational amplifier. The NE570 is well suited for use in cellular radio and radio communications systems, modems, telephone, and satellite broadcast/receive audio systems.

File format: PDF Size:98 KB

The NL37WZ16 is a high performance buffer with inputs operating from a 1.65 to 5.5 V supply. The NL37WZ16 can be used as a line receiver which will receive slow input signals.

File format: PDF Size:108 KB

The MC74HC374A is an octal 3-state non-inverting D flip-flop manufactured using high-performance silicon-gate CMOS technology. It has the same pinout as the LS374 and its inputs are compatible with standard CMOS outputs. Data meeting the setup time is clocked to the outputs with the rising edge of the clock. The Output Enable input does not affect the states of the flip-flops, but when Output Enable is high, the outputs are forced to the high-impedance state. The HC374A is identical in function to the HC574A which has the input pins on the opposite side of the package from the output. This device is similar in function to the HC534A which has inverting outputs.

File format: PDF Size:138 KB