ON Manuals (Industrial)
ON SEMICONDUCTOR MC14040B Manual
MC14040B is a 12-stage binary counter constructed with MOS P-Channel and N-Channel enhancement mode devices in a single monolithic structure. It features fully static operation, diode protection on all inputs, a wide supply voltage range, and the ability to drive low-power TTL loads. It is commonly used in time delay circuits, counter controls, and frequency-driving circuits.
File format: PDF Size:111 KB
ON SEMICONDUCTOR - NCP1523 3 MHz 600 mA High Efficiency Adjustable Output Voltage Step down Converter Manual
The NCP1523 is a 3 MHz, 600mA, high efficiency, adjustable output voltage step-down converter, optimized for portable applications powered from a 1-cell Li-ion or 3 cell Alkaline/NiCd/NiMH battery. The device is available in an adjustable output voltage from 0.9V to 3.3V. It uses synchronous rectification to increase efficiency and reduce external part count. The device also has a built-in 3 MHz (nominal) oscillator which reduces component size by allowing use of a small inductor and capacitors. NCP1523 is available in automatic switching PWM/PFM (NCP1523FCT2G) improving system efficiency and in PWM mode only (NCP1523BFCT2G) offering a very efficient load transient solution. Additional features include integrated soft-start, cycle-by-cycle current limiting and thermal shutdown protection. The NCP1523 is available in a space saving, 8 pin chip scale package.
File format: PDF Size:262 KB
ON SEMICONDUCTOR NCP3163 NCV3163 handbook
The NCP3163 is a 3.4 A, 50 to 300 kHz step-up/down/inverting switching regulator that can be used in step-down, step-up, or voltage-inverting applications. This controller was specifically designed to be incorporated in step-down, step-up, or voltage-inverting applications with a minimum number of external components.
File format: PDF Size:211 KB
ON SEMICONDUCTOR MC74HC574A handbook
File format: PDF Size:0 KB
ON SEMICONDUCTOR MC14538B handbook
MC14538B/D Dual Precision Retriggerable/Resettable Monostable Multivibrator
File format: PDF Size:152 KB
ON SEMICONDUCTOR MC10EP56 MC100EP56 handbook
File format: PDF Size:0 KB
ON SEMICONDUCTOR MC14099B handbook
The MC14099B is an 8-bit addressable latch. Data is entered in serial form when the appropriate latch is addressed (via address pins A0, A1, A2) and write disable is in the low state. For the MC14099B the input is a unidirectional write only port. The data is presented in parallel at the output of the eight latches independently of the state of Write Disable, Write/Read or Chip Enable. A Master Reset capability is available on both parts.
File format: PDF Size:94 KB
ON SEMICONDUCTOR MC1488 handbook
The MC1488 is a monolithic quad line driver designed to interface data terminal equipment (DTE) with data communications equipment (DCE) in conformance with the specifications of EIA Standard No. EIA-232D.
File format: PDF Size:119 KB
ON SEMICONDUCTOR - NTF5P03T3 handbook
NTF5P03T3 is a P-channel MOSFET from onsemi company. Its main feature is RDS(on) as low as 100 mΩ. It can be used for DC-DC converters, power management, motor control, etc.
File format: PDF Size:77 KB
ON SEMICONDUCTOR MC14516B handbook
The MC14516B synchronous up/down binary counter
File format: PDF Size:114 KB
ON SEMICONDUCTOR NCP3063 NCP3063B NCV3063 handbook
NCP3063, NCP3063B, NCV3063 1.5 A, Step-Up/Down/ Inverting Switching Regulators is a switching power chip produced by Onsemi. It is mainly used for step-down, step-up and inverting applications.
File format: PDF Size:314 KB
ON SEMICONDUCTOR Octal 3-State Noninverting Transparent Latch
The MC74HC573A is an octal 3-state noninverting transparent latch that utilizes high-performance silicon-gate CMOS technology. It has the same pinout as the LS573 and is compatible with standard CMOS outputs and LSTTL outputs with pullup resistors. The outputs change asynchronously when the latch enable is high, making the latch appear transparent to data. When the latch enable goes low, data meeting the setup and hold time is latched. The HC573A is functionally equivalent to the HC373A but has the data inputs on the opposite side of the package to facilitate PCB layout.
File format: PDF Size:98 KB
ON SEMICONDUCTOR MC14014B MC14021B Data Sheet
This datasheet provides detailed information on the MC14014B and MC14021B 8-bit static shift registers. These shift registers are primarily used for parallel-to-serial data conversion, synchronous and asynchronous parallel input, serial output data queuing, and other general purpose register applications requiring low power and/or high noise immunity.
File format: PDF Size:101 KB
ON SEMICONDUCTOR MC74HC244A handbook
MC74HC244A Octal 3−State Noninverting Buffer/Line Driver/ Line Receiver
File format: PDF Size:116 KB
ON SEMICONDUCTOR NTGS4111P handbook
The NTGS4111P is a power MOSFET produced by Semiconductor Components Industries, LLC. Its features include the use of a leading -30 V trench process with low RDS(on), a low profile package suitable for portable applications, a surface mount TSOP-6 package that saves board space, improved efficiency for battery applications, and a lead-free package that is available.
File format: PDF Size:72 KB
ON SEMICONDUCTOR MC74HC373A handbook
The MC74HC373A is an 8-bit 3-State Non-Inverting Transparent Latch with High-Performance Silicon-Gate CMOS.
File format: PDF Size:120 KB
ON SEMICONDUCTOR MC34161 MC33161 NCV33161 handbook
The MC34161/MC33161 is a universal voltage monitor intended for use in a wide variety of voltage sensing applications. These devices offer the circuit designer an economical solution for positive and negative voltage detection. The circuit consists of two comparator channels each with hysteresis, a unique Mode Select Input for channel programming, a pinned out 2.54 V reference, and two open collector outputs capable of sinking in excess of 10mA. Each comparator channel can be configured as either inverting or noninverting by the Mode Select Input. This allows over, under, and window detection of positive and negative voltages. The minimum supply voltage needed for these devices to be fully functional is 2.0 V for positive voltage sensing and 4.0V for negative voltage sensing. Applications include direct monitoring of positive and negative voltages used in appliance, automotive, consumer, and industrial equipment.
File format: PDF Size:216 KB
ON SEMICONDUCTOR MC34262 MC33262 Manual
The MC34262/MC33262 are active power factor controllers specifically designed for use as a preconverter in electronic ballast and in off−line power converter applications. These integrated circuits feature an internal startup timer for stand−alone applications, a one quadrant multiplier for near unity power factor, zero current detector to ensure critical conduction operation, transconductance error amplifier, quickstart circuit for enhanced startup, trimmed internal bandgap reference, current sensing comparator, and a totem pole output ideally suited for driving a power MOSFET. Also included are protective features consisting of an overvoltage comparator to eliminate runaway output voltage due to load removal, input undervoltage lockout with hysteresis, cycle−by−cycle current limiting, multiplier output clamp that limits maximum peak switch current, an RS latch for single pulse metering, and a drive output high state clamp for MOSFET gate protection.
File format: PDF Size:276 KB
ON SEMICONDUCTOR MAX707 Data Sheet
File format: PDF Size:0 KB
ON Semiconductor LM2596 DATA SHEET
LM2596 3.0 A, Step-Down Switching Regulator is a switch-mode power supply chip produced by American National Semiconductor Corporation. It has features such as adjustable output voltage, high efficiency and less external components.
File format: PDF Size:456 KB