Semtech STF203-15 Manuals

The STF203 is a combination EMI filter and line termination device with integrated TVS diodes for use on upstream USB ports. It is constructed using a proprietary technology that allows passive components and TVS diodes to be integrated in the same package. Each device will provide termination, filtering, and ESD protection for one upstream USB port. The STF203 is an easily implemented solution for meeting the requirements of revision 1.1 of the Universal Serial Bus specification. Line termination is achieved with series resistors on both the D+ and D- USB lines. The value of series resistance added to the output impedance of the USB driver must be as close to possible to the 45Ω characteristic impedance of the cable (90Ω balanced) to minimize transmission line reflections. They are available with resistor values of 15Ω (STF203-15), 22Ω (STF203-22), and 33Ω (STF203-33). The 1.5kΩ pull-up resistor is required by the USB specification to identify the equipment as either a full-speed (connected to D+ line) or low-speed (connected to D- line) device. The 47pF capacitors are required to bypass high frequency energy to ground and to control the edge rate of the USB signals. The TVS diodes provide ESD protection of both (D+ & D-) data lines and the voltage bus (VBUS)

This product is Huawei's HUAWEI P50 phone, which uses a 6.57-inch OLED screen with a resolution of 2700 x 1228 pixels and a refresh rate of 90Hz. It is powered by the Kirin 9000 processor and has a triple rear camera system with a 50-megapixel main camera, a 13-megapixel ultrawide camera, and a 12-megapixel telephoto camera. The front camera is a 13-megapixel camera.