Key facts
- Brand
- Lenovo
- Model
- LW-8054LH
- Documents
- 2
- Languages
- ZH
- Last added
- 2000-01-01
Start here
Lenovo LW-8054LH+ Wireless AP Quick Installation Guide
The Quick Installation Guide explains how to install and configure the LW-8054LH+ wireless AP, including antenna connection, power input, and network ports. It also describes the default settings and how to access the device for initial setup.
The document walks through TCP/IP parameter configuration, testing connectivity with ping, and using the web interface (http://192.168.1.2) to adjust settings. Contact information for technical support is provided at the end. This manual is written in Chinese.
Lenovo LW-8054LH specifications
| Power Supply | DC 24 V / 1.5 A |
|---|---|
| LAN Interface | 10/100 M Ethernet (RJ‑45) |
| Wireless Standards | IEEE 802.11b/g, up to 54 Mbps |
| Antenna Gain | 1 dBi |
All Lenovo LW-8054LH documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
How do I access the web management interface of the AP?
Open a browser and go to http://192.168.1.2 to reach the AP’s web interface.
From: Lenovo LW-8054LH+ Wireless AP Quick Installation Guide
How can I verify the AP is reachable on the network?
Use the ping command (e.g., ping 192.168.1.2) to test connectivity.
From: Lenovo LW-8054LH+ Wireless AP Quick Installation Guide
What is the default IP address for accessing the web interface?
The default IP address is 192.168.1.2.
How can I enable the DHCP server on the AP?
Enable the DHCP server in the AP settings under the DHCP Server option.