Allied Telesis AT-FS708 Manuals

ManualLib has 3 documents for the Allied Telesis AT-FS708: 2 installation guides, 1 product leaflet. Every file can be read online or downloaded as a PDF for free.

Installation Guide 2Product Leaflet 1

Key facts

Model
AT-FS708
Documents
3
Languages
EN · ZH
Last added
2026-11-13

Start here

Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

Installation Guide 61 pages · 877 KB · EN

This document provides hardware installation instructions for the AT-FS708 Fast Ethernet switch. It covers the entire installation process, from reviewing safety precautions and selecting a site to unpacking, mounting the unit on a table or in a rack, and cabling the device. The guide also includes basic Ethernet switching concepts and troubleshooting tips.

Read online

Allied Telesis AT-FS708 specifications

Dimensions250 mm x 117 mm x 36 mm (9.83 in x 4.60 in x 1.42 in)
Weight0.77 kg (1.7 lbs)
Operating Temperature0° C to 40° C (32° F to 104° F)
Power Consumption9 watts maximum
AC Input VoltageAC 100~240 VAC
MTBF250,000 hours

Source: Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

All Allied Telesis AT-FS708 documents by type

Installation Guide 2

Mounting, wiring and first power-up. Read it before the hardware goes in.

Questions answered in these manuals

What is the maximum operating distance for 100 Mbps twisted pair cabling?

The maximum operating distance is 100 m (328 ft) when using Category 5 or Category 5E cable.

From: Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

Can I use a straight-through cable for any network device connection?

Yes, because the ports feature Auto-MDI, allowing the use of a straight-through twisted pair cable for any network device.

From: Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

What should I do if the POWER LED is OFF?

Verify the power cord is securely connected, check the outlet with another device, try a different power source or cord, and ensure the voltage matches regional requirements.

From: Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

What if a LINK/ACT LED is OFF?

Verify the end-node is powered and operating, ensure the twisted pair cable is securely connected, confirm the cable does not exceed 100 meters, and use Category 3 or better for 10 Mbps or Category 5/5E for 100 Mbps.

From: Allied Telesis AT-FS708 Fast Ethernet Switch Installation Guide

What is the maximum packet forwarding rate of the AT-FS708/PoE?

The switch can forward up to 14,880 packets per second at 10 Mbps and up to 148,800 packets per second at 100 Mbps.

From: Allied Telesyn AT-FS708/PoE Switch Selection Guide

Does the AT-FS708/PoE have a fan?

No, the AT-FS708/PoE uses a fanless low‑power design.

From: Allied Telesyn AT-FS708/PoE Switch Selection Guide