Key facts
- Brand
- Allied Telesis
- Model
- AT-8000
- Category
- Network Switches
- Documents
- 5
- Languages
- EN · ZH
- Last added
- 2026-10-29
Start here

Allied Telesyn AT-8000S Series Switch Quick Start Guide
This guide explains how to connect to the AT-8000S switch via the console port, log in with the default credentials (username manager, password fiend), and perform basic tasks such as setting an IP address and upgrading firmware using TFTP. It also covers the command‑line interface modes and how to save configurations.
Further sections describe port configuration (speed, duplex, MDI auto), VLAN setup, port aggregation (trunk groups), Spanning‑Tree settings, IEEE 802.1x authentication, and SNMP configuration, providing the essential commands for each feature. This manual is written in Chinese.
Allied Telesis AT-8000 specifications
| Ports | 24 10/100/1000T ports with PoE + 4 combo SFP slots |
|---|---|
| Stacking Bandwidth | 20Gbps |
| Switching Capacity | 68Gbps |
| Packet Buffer Memory | 3Mbit |
| RAM | 128MB |
| Flash Memory | 16MB |
| MTBF | 80,000 hours |
| Power Input | 100-240V AC / 50-60Hz |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| PoE Standard | IEEE 802.3af |
Source: Allied Telesis AT-8000GS/24POE Layer 2 Stackable Gigabit Power over Ethernet Switch Datasheet
All Allied Telesis AT-8000 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the stacking bandwidth of this switch?
The switch features two integrated stacking connectors that deliver a total of 20Gbps stacking bandwidth.
From: Allied Telesis AT-8000GS/24POE Layer 2 Stackable Gigabit Power over Ethernet Switch Datasheet
Does this switch support Power over Ethernet?
Yes, it provides IEEE 802.3af Power over Ethernet to all 24 10/100/1000 ports.
From: Allied Telesis AT-8000GS/24POE Layer 2 Stackable Gigabit Power over Ethernet Switch Datasheet
What is the maximum operating temperature for the switch?
The switch can operate in temperatures ranging from 0° C to 45° C.
From: Allied Telesis AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
What is the maximum power consumption of the switch?
The maximum AC input power consumption is 135 W.
From: Allied Telesis AT-8000/8POE Layer 2 Fast Ethernet Switch Installation Guide
What is the stacking bandwidth of the AT‑8000S series?
The hardware stacking bandwidth can reach full‑duplex 4 Gbps.
How many PoE ports does the AT‑8000S/48POE model provide?
The AT‑8000S/48POE model has 48 PoE ports.
