AT-8000S Series Switch Quick Start Guide introduces the connection, software upgrade, port configuration, VLAN configuration, port aggregation, port mirroring, port speed limiting, spanning tree, IEEE802.1x function and SNMP function of the switch.
This guide explains how to connect to the AT-8000S switch via the console port, log in with the default credentials (username manager, password fiend), and perform basic tasks such as setting an IP address and upgrading firmware using TFTP. It also covers the command‑line interface modes and how to save configurations.
Further sections describe port configuration (speed, duplex, MDI auto), VLAN setup, port aggregation (trunk groups), Spanning‑Tree settings, IEEE 802.1x authentication, and SNMP configuration, providing the essential commands for each feature. This manual is written in Chinese.
| Console baud rate | 115200 bps |
|---|---|
| Default username | manager |
| Default password | fiend |
| Maximum port trunk groups | 8 |
| Maximum ports per trunk group | 8 |
| Supported port speed | 100M |
The default username is manager and the default password is fiend.
Configure an IP address on VLAN 1, start a TFTP server, and use the command copy tftp:/
The switch can support up to eight port trunk groups, each with a maximum of eight ports.