PASCO PS-2180 Smart Gate instruction sheet covering setup, mounting, compatible equipment, photogate tape, and data recording.
The PASCO PS-2180 Smart Gate measures the time for the motion of a moving object, such as a PASCO Cart. PASCO data collection software analyzes the data and calculates position, velocity, and acceleration; the sensor works with a PASPORT-compatible interface and software such as PASCO Capstone or SPARKvue. It has three detector ports and one Auxiliary port, and includes a Sensor Extension Cable (PS-2500) and a Mounting Rod.
The instruction sheet explains connecting the Smart Gate to a PASPORT input port and testing it with the indicator LED. It also describes mounting the unit on a support rod, PASCO Track, or Projectile Launcher, and using it with the Time-of-Flight Accessory, Photogate Tape, a Picket Fence on a cart, or a Photogate Pendulum. Specifications list rise and fall time, infrared source wavelength, and minimum block time.
| Rise and Fall Time | Symmetrical, all four ports |
|---|---|
| Infrared Source | 940 nm |
| Minimum Block Time, Detector Ports 1 and 2 | 1.5 ms |
| Detector port spacing | 1.5 cm |
| Sensor Extension Cable length | 2 m |
| Mounting Rod dimensions | 14 cm long, 0.95 cm diameter |
| Open space for Smart Gate | 7.2 cm wide by 4.0 cm deep |
| Auxiliary Port plug type | 1/4 in (6.35 mm) tip-ring-sleeve phono plug |
It measures the time for the motion of a moving object, such as a PASCO Cart.
It works with a PASPORT-compatible interface, such as the PS-2100 USB Link, and software such as PASCO Capstone or SPARKvue.
It has three detector ports and one Auxiliary port.
It can detect a laser beam in the same way as the PASCO Laser Switch (ME-9259A) and allows measurement of an object too large to pass through the Smart Gate.