Specifications for the Hammond 1760H tube guitar amplifier output transformer: 20 W, 4/8/16 ohm outputs, 6600 ohm input impedance, dimensions and lead code.
This two-page Hammond Manufacturing data sheet covers the 1760H tube guitar amplifier output transformer, a 20 W open-style unit with 4, 8 and 16 ohm outputs and a typical input impedance of 6600 ohms. Electrical characteristics measured at 1.0 kHz and 1.0 V are listed, including 25.8 H primary inductance, 12.30 mH leakage inductance, 157 KOhm primary impedance, 347.8 ohms primary DCR and secondary DCR values of 0.686, 0.803 and 1.157 ohms. Frequency response is given as 70 Hz to 15 kHz (0/-1 dB referenced at 1 kHz) with distortion under 1% at 70 Hz.
The sheet also contains a dimensioned outline drawing with dimensions A through G, a lead color code (brown-blue primary with 6600 ohm center tap; black, green, white and yellow for common, 4, 8 and 16 ohm), a typical test circuit, and the instruments used for measurement. Hammond states the transformer is designed as a drop-in replacement of original units, constructed to look similar to original factory units where possible, with materials and design specifications kept as close as possible to the original part to preserve the stock tone. Leads are at least 9 inches long, dielectric strength is 1500 V RMS and the temperature range is -40 to 105 degC; the unit is marked made in Canada.
| Output Power | 20 W |
|---|---|
| Output Impedance | 4, 8 and 16 ohms |
| Typical Input Impedance | 6600 Ohms |
| Frequency Response | 70 Hz - 15 kHz (0/-1 dB reference at 1 kHz) |
| Distortion | Less than 1% at 70 Hz |
| Primary Inductance | 25.8 H |
| Primary Impedance | 157 KOhm |
| Leakage Inductance | 12.30 mH |
| Primary DCR | 347.8 Ohms |
| Secondary DCR | 0.686 Ohm, 0.803 Ohm, 1.157 Ohm |
| Dielectric Strength | 1500 V RMS |
| Temperature Range | -40 to 105 degC |
| Lead Length | Minimum 9 inches |
| Dimension A | 3.688 in ±0.063 |
It has 4, 8 and 16 ohm outputs at 20 W output power.
70 Hz to 15 kHz, referenced at 0/-1 dB at 1 kHz.
The typical input impedance is 6600 Ohms.
The unit is marked as made in Canada.