A user manual for the Axis C8110 Network Audio Bridge covering setup, SIP configuration, event rules, and audio playback examples.
This manual explains how to make the Axis C8110 Network Audio Bridge accessible to an audio system and how to configure the device directly from its interface when no audio or video management software is used. It also lists management software options: AXIS Audio Manager Edge, AXIS Audio Manager Pro, AXIS Camera Station, and AXIS Companion.
It covers finding devices on the network with AXIS IP Utility or AXIS Device Manager, browser support, accessing the device, and setting a new root password. Other sections describe connecting a microphone to the line-in for sound detection and recording, direct SIP (P2P) and SIP through a PBX server, event rules, playing audio when an Axis network camera detects motion, and stopping audio playback with DTMF. This manual is written in Chinese.
| Default SIP port | 5060 |
|---|---|
| Default TLS port | 5061 |
| Default RTP start port | 4000 |
| RTP port range | 1024 to 65535 |
The default administrator username is root. If the root password is lost, reset the device to factory default settings.
Use AXIS IP Utility or AXIS Device Manager to find Axis devices on the network and assign IP addresses in Windows.
Use direct SIP (P2P) for communication between a few user agents on the same IP network when no PBX server is needed.
The default SIP port is 5060. A different port number can be entered if needed.