User's guide for AXIS 200+ and 240 camera servers covering hardware connection, IP address assignment, configuration, and operation.
This guide covers the AXIS 200+ and 240 camera servers, including the AXIS 200+ self-contained network camera and the AXIS 240 camera server. It provides instructions for connecting hardware, assigning an IP address, verifying the installation, adjusting focus, and configuring the camera server through a web browser.
The document also covers snapshots, automatic picture updating, pan/tilt control, external web sites, CRON scripts, application examples, hardware inventory, auto iris lens connections, and modem installation.
| AXIS 240 camera inputs | Up to four PAL/NTSC video sources and one S-video camera |
|---|---|
| AXIS 240 coax camera connections | Up to four coax/BNC cameras and one S-video camera |
| Pan/Tilt port | RS-232 Pan/Tilt port |
| Software release coverage | 1.41 and 1.12 and above for the AXIS 200+ and 240 respectively |
The IP address can be assigned using the AXIS IP Installer program or ARP. The serial number on the underside label equals the Ethernet address of the unit.
The AXIS 240 can service up to four PAL/NTSC video sources and one S-video camera, and can connect up to four coax/BNC cameras and one S-video camera.
Start a web browser and enter the camera server IP address in the location or address field to access the Home Page.
The AXIS 200+ is a self-contained network camera with interchangeable optics.