This quick start guide covers searching, configuring, testing functions (counting, frequency measurement), and ASCII commands for the Advantech ADAM-4080…
The document is a quick start manual for the Advantech ADAM-4080, a 32-bit counter and frequency measurement module. It details how to install the necessary software (Adam/Apax .NET Utility) and configure the module's initialization parameters such as address, baud rate, protocol, and data structure via shorting INIT* and GND pins.
The guide provides step-by-step instructions for functional testing in both isolated and non-isolated input modes. It explains how to use gate signals (Disabled, Low, High) to control counting operations and describes the module's programmable digital filter capabilities for noise elimination. Additionally, it covers frequency measurement tests and basic ASCII command usage. This manual is written in Chinese.
The ADAM-4080 and 4080D modules support a maximum baud rate of 38400bps.
For non-isolated inputs, Logic 0 is 0~5V (default 0.8V) and Logic 1 is 0~5V (default 2.4V).
For isolated signals, Logic 0 is 1V (max) and Logic 1 ranges from 3.5V to 30V.
The module has two open-collector DO outputs that can withstand a maximum load of 30V and 30mA.