The Sony SmartBand 2 is a wearable device that can track your activity and sleep. Its features include:
Sony SmartBand 2 (SWR12) is a wearable accessory that connects wirelessly to an iPhone via Bluetooth. Worn on the dominant wrist, it monitors body movement, counts steps, and uses a pulse sensor to track heart rate. It also provides stress and recovery values based on heart rate and heart rate variability, and can receive notifications, manage alarms and calls, and send move reminders.
This user guide explains charging, mounting, wearing, powering on and off, setup and reconnection, notifications, move reminders, stress and recovery measurement, smart alarm, out-of-range alerts, do not disturb, remote control, health connection, notification lights, and care information. This manual is written in Spanish.
| Compatible iPhone iOS version | iOS 8.2 or later |
|---|---|
| Initial charge time | about 30 minutes |
| Charging indicator (red) | below 15% |
| Charging indicator (orange) | 15% to 90% |
| Charging indicator (green) | above 90% |
| Low battery notification (heart rate mode) | about 5 minutes remaining |
| Low battery notification (STAMINA mode) | about 75 minutes remaining |
| Automatic power off | below 1% battery |
| Connectivity | Bluetooth wireless |
| Sensor | heart rate (pulse) sensor |
| Charging port | micro USB |
| Wearing position | dominant wrist, two fingers above wrist bone |
| Stress measurement | heart rate and heart rate variability |
Charge it for about 30 minutes before first use. Connect one end of the USB cable to the charger or a computer and the other end to the SmartBand 2 micro USB port.
Press and hold the power key until the SmartBand 2 vibrates.
The iPhone must run iOS version 8.2 or later.
Turn it off, then hold the power key for 5 to 10 seconds until the green light starts flashing.