Honeywell RV281 Controllable Anti-Pollution Check Valve EA Type Product Specification Sheet

The product is a controllable anti-pollution check valve that can be used in industrial, commercial and similar systems to prevent backflow, back pressure and back siphonage.


Honeywell RV281 Controllable Anti-Pollution Check Valve EA Type Product Specification Sheet - cover page
Brand
Honeywell
Category
Other
Document type
Product Leaflet
Language
English
Pages
4
File format
PDF
File size
245 KB
Published
30 October, 2023
Updated
30 October, 2023
Model
RV281
MD5 checksum
DD5D284E668C52887AC6465940BC3286

About this manual

This product specification sheet covers the Honeywell RV281 controllable anti-pollution check valve, EA type with union connectors. It describes how the valve is built (brass housing, check valve insert, threaded or soldered union connectors, test and drain plugs, spring, disc with lip seal ring), lists the materials used and explains that the valve is intended as an independent means of preventing reverse water flow, typically installed directly after a water meter in central water supply systems, and as a safety device up to liquid category 2 of EN 1717.

Technical data is given for water as the medium, with an operating pressure of 16 bar, an opening pressure of approx. 0.05 bar and connection sizes from 1/2" to 2". The sheet also presents the method of operation of the spring-loaded check valve, the three connection options (A internal thread, B soldering, E external thread), a table of connection sizes, weights, dimensions and kvs-values, installation guidelines, typical applications, and a spare parts list with part numbers for the disc guide, spring, valve disc, hexagon plug and seal washer.

What's inside

  • Construction
  • Materials
  • Application
  • Special Features
  • Range of Application / Technical Data
  • Method of Operation
  • Options
  • Dimensions and Weights
  • Installation Guidelines
  • Typical Applications

Specifications

MediumWater, liquid category 2 (no hazardous material)
Operating pressure16 bar
Operating temperatureWater up to 65 °C (short term up to 90 °C), according to DIN EN 13959
Opening pressureapprox. 0.05 bar
Connection size1/2" - 2"
Housing materialBrass
Lip seal ring materialEPDM
Spring materialStainless steel
Test and drain plug threadR 1/4"
kvs-value range4.5 to 60.0 m3/h
DIN/DVGW registration numberNW-6310 AT 2325

Frequently asked questions

What is the operating pressure of the Honeywell RV281 check valve?

The operating pressure is 16 bar. The medium is water of liquid category 2 with no hazardous material.

What is the opening pressure of the RV281?

The opening pressure is approximately 0.05 bar.

Where should the RV281 check valve be installed?

It can be installed in any position but is recommended in horizontal pipework with the test and drain plug downwards, right after a water meter if applicable, with shutoff valves for serviceability.

Download PDF (245 KB)

More Honeywell Manuals


View all Honeywell manuals →