Instruction manual for AT-LP60XHP automatic belt-driven turntable with headphone amplifier, including safety instructions, installation precautions, and operating precautions.
This is the Chinese-language instruction manual (使用说明书) for the Audio-Technica AT-LP60XHP, an automatic belt-drive turntable supplied with a headphone amplifier and ATH-250AV headphones. It opens with the box contents and the safety and usage precautions for both the turntable and the headphones, followed by a labeled list of part names and functions.
The second half explains first-time setup: fitting the platter and drive belt on the motor pulley, placing the wool mat and 45 rpm adapter, rotating the platter by hand, setting the built-in phono equalizer with the preamp selector switch (PHONO or LINE), connecting the RCA cable to a compatible device, and connecting the power supply. It ends with a troubleshooting table and an outline dimension drawing. This manual is written in Chinese.
| Drive system | Automatic belt drive |
|---|---|
| Turntable speeds | 33-1/3 or 45 RPM |
| Cartridge | AT3600L |
| Headphone jack | 3.5 mm |
| Output terminals | RCA |
| Included headphones | ATH-250AV |
| RCA cable length | approx. 1.2 m |
Set it to PHONO when the connected amplifier has a PHONO input jack, and to LINE when connecting to the amplifier's AUX jack.
Check that the power supply is connected to the outlet, that the belt is correctly on the platter and on the motor pulley, and replace the belt if it is damaged.
Check the settings and input of the connected device, check the stylus and replace it if necessary, and check the preamp switch position.
The turntable, wool mat, platter with drive belt, 45 rpm adapter, RCA cable, ATH-250AV headphones, power supply, quick start guide and precautions.