This document provides an overview of the Monarch SiP SKY66430-11 evaluation board, its basic installation procedures and a quick startup reference.
This document provides instructions for setting up and using the Skyworks SKY66430-11 / SQN66430-11 SiP evaluation board. It includes steps for installing drivers, configuring COM ports, using AT commands via serial terminal, and connecting to LTE-M networks. The board requires a SIM card and USB cable for operation. It supports various LTE-M operators and bands, with automatic reconfiguration for unsupported SIMs.
The manual also details software dependencies like Tera Term for terminal emulation and optional tools for advanced operations. It explains how to verify installation through Windows Device Manager and configure UART ports for AT commands and console access.
| SiP Chipset | Sequans Monarch 3330 |
|---|---|
| Software Version | LTE-M software release LR5.2.1-XXXXX or greater |
| Baudrate for UART 0 | 921600 |
| Default COM Port for UART 0 | COMa (e.g., COM29) |
A Serial Terminal Emulator under Windows is mandatory, such as Tera Term. Optional tools include Sequans Point-to-Point Protocol Software Bridge, Sequans Software Upgrade (SFU) Tool, and Sequans Debug and Monitoring Tool (DM Tool).
After installing drivers, open Windows Device Manager, expand Ports (COM&LPT), and configure each USB Serial Port (COMx) with the correct baudrate, data bits, flow control, and parity as specified in the COM ports overview table.