Key facts
- Manuals
- 10
- Languages
- EN · ES
- Last added
- 2026-10-01
Featured Skyworks manuals
Skyworks SKY77432 Power Amplifier Module Datasheet
The SKY77432 module provides true multi‑mode, multi‑band operation for next‑generation handsets. It combines separate high‑band and low‑band GaAs HBT PA blocks with matching circuitry for 100 Ω differential input and 50 Ω single‑ended output, enabling efficient performance in GSM, EGPRS, EDGE and WCDMA modes.
The device is supplied in a 30‑pad, 6 mm × 8 mm × 1.1 mm MCM package and is compatible with a 4.6 V Buck‑Boost DC/DC converter. It supports quad‑band GSM (850/900/1800/1900), EGPRS Class 12 multi‑slot, and 3G bands I, II, III, IV, V, and VIII, with linear and high‑efficiency operating modes controlled via logic‑level pins.
Covers: Product Summary · Features · Ordering Information · Functional Block Diagram · Specifications
Skyworks Ceramic Band Pass Filters Data Sheet
The document introduces Skyworks' ceramic band pass filters, describing their high‑Q, low‑loss performance and a wide range of applications from 300 MHz to 6 GHz. It highlights the company's design capabilities, custom options, and the CRaFT software tool for filter design.
Detailed specifications are listed, including frequency ranges, pole counts, insertion loss, impedance, temperature limits, and power handling. Various mechanical packages such as SMT, thru‑hole, and flat‑pack are described, along with dimensions and design examples using the CRaFT program.
Covers: Introduction and Applications · Standard Capabilities · Standard Filters/Duplexers · Available Packages · Mechanical Drawings · Design Solutions Software (CRaFT)
Skyworks AAT3683 1A Linear Li‑Ion Battery Charger Datasheet
The AAT3683 is a highly integrated single‑cell lithium‑ion/polymer charger that can be powered from a USB port or an AC adapter up to 7.5 V. It precisely regulates charge voltage and current for 4.2 V cells, with charge current programmable from 100 mA to 1 A using an external resistor or ISET pin.
The device includes digital thermal loop control, status monitor output, and protection against over‑voltage, over‑current, short‑circuit and over‑temperature conditions. It is offered in 2.2 × 2.2 mm STDFN‑10 and QFN33‑16 packages and operates from –40 °C to +85 °C.
Covers: General Description · Features · Applications · Pin Descriptions · Electrical Characteristics · Typical Characteristics
Skyworks SKY65326-11 380-500 MHz Transmit/Receive Front-End Module Datasheet
The SKY65326-11 is a high‑efficiency front‑end module that integrates a transmit power amplifier, a receive path, and a single‑pole double‑throw antenna switch. It operates from 380 MHz to 500 MHz, provides >+30 dBm output power, and features internal DC‑blocked RF ports with a single +3.6 V supply.
The module is supplied in a 12‑pin 8 × 8 mm MCM surface‑mount package (MSL‑3, RoHS‑compliant). Detailed electrical specifications, absolute maximum ratings, recommended operating conditions, and evaluation‑board information are included for designers.
Covers: Applications · Features · Description · Pinout · Technical Description · Operational Modes
Latest Skyworks manuals
Skyworks SKY77432 Power Amplifier Module Datasheet
Datasheet 2 pages · 198 KB · ENThe SKY77432 is a multi‑mode, multi‑band power amplifier module for 2.5G and 3G handsets, supporting GSM, EGPRS, EDGE and WCDMA.
Skyworks Ceramic Band Pass Filters Data Sheet
Datasheet 10 pages · 193 KB · ENSkyworks data sheet provides specifications, package options, and design information for its ceramic band pass filters.
Skyworks AAT3683 1A Linear Li‑Ion Battery Charger Datasheet
Datasheet 22 pages · 1.2 MB · ENThe Skyworks AAT3683 is a 1 A linear Li‑Ion battery charger with USB or AC input, programmable current and built‑in protection.
Skyworks SKY65326-11 380-500 MHz Transmit/Receive Front-End Module Datasheet
Datasheet 12 pages · 753 KB · ENTechnical data sheet for the Skyworks SKY65326-11 380‑500 MHz transmit/receive front‑end module.
SKY WORKS 2540 ESV11 Inverter MIG/TIG/MMA User Manual
User Manual 22 pages · 424 KB · ESUser manual for the SKY WORKS 2540 ESV11 inverter welding machine covering safety, installation, operation and maintenance.
SKYWORKS CX20524 Mixed Signal Device for GSM GPRS Applications
This document introduces the CX20524 mixed signal device, which is used in GSM and GPRS applications. It supports multi-slot GPRS and can interface with the Skyworks Baseband Processor device. The device also has low noise voice band ADCs and DACs, a temperature sensor, high and low speed asynchronous serial ports, voltage regulators, low power operation, a control circuit, power on/off control inputs, and more.
SKYWORKS CX74063-26 DATA SHEET
CX74063-26 is an RF transceiver for multi-band GSM, GPRS, and EDGE applications with power ramping controller and integrated crystal oscillator with 26 MHz output.
Skyworks Solutions Inc DATA SHEET Surface Mount Mixer Detector Schottky Diodes
This is a product datasheet of Skyworks Solutions, Inc.'s surface mount mixer and detector Schottky diodes. The product has tight parameter distribution and can be used in high-volume wireless applications, RF and microwave mixers and detectors, low-noise receivers in high-sensitivity ID tags, and radio designs.
SKYWORKS ATN3580 Series handbook
The ATN3580 series fixed attenuator pads data sheet introduces product features and characteristics, including specified flat response to 40GHz, return loss> 16dB to 40GHz, available at 1-10, 12, 15, 20, 30 and 40dB, power handling to 1W CW, rugged thin film silicon chips.
SKYWORKS SC SERIES DATA SHEET
Skyworks MIS Chip Capacitors are a high reliability product that is suitable for applications requiring DC blocking, RF bypassing or as a fixed capacitance tuning element in filters, oscillators and matching networks.
Which document do I need?
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in Skyworks manuals
What are the input and output impedance requirements?
The module uses a 100 Ω differential input and a 50 Ω single‑ended output.
Which power‑supply architecture is compatible with the SKY77432?
The module is compatible with a 4.6 V Buck‑Boost DC/DC converter.
What is the operating temperature range of the filters?
The filters operate from –40 °C to +85 °C.
What is the typical insertion loss range?
Typical insertion loss is between 1 dB and 4 dB.
What input sources can the AAT3683 use?
It can be powered from a USB port or an AC adapter up to 7.5 V.
From: Skyworks AAT3683 1A Linear Li‑Ion Battery Charger Datasheet
How is the charge current set on the AAT3683?
The charge current is programmed by an external resistor (or ISET pin) to select a value between 100 mA and 1 A.
From: Skyworks AAT3683 1A Linear Li‑Ion Battery Charger Datasheet