This document describes the features and characteristics of the Extech SDL350 Hot Wire Thermo-Anemometer Datalogger, including displaying and storing air velocity and temperature readings, supporting temperature readings from the built-in probe or an externally connected type K or J thermocouple temperature probe. Data is stored on an SD card for transfer to a PC.
The Extech SDL350 is a Hot Wire Thermo-Anemometer Datalogger designed to measure and store air velocity and temperature readings. It features a built-in thermometer and supports external Type K or J thermocouples. Data is stored on an SD card for later transfer to a PC.
| Power Source | Six (6) 1.5V 'AA' batteries |
|---|---|
| SD Card Capacity | 1G size up to 16G |
| Thermocouple Types | Type K or J |
| Manual Datalogging Capacity | up to 99 readings |
| Automatic Datalogging Limit | 30,000 readings per document |
The meter is normally powered by six 1.5V 'AA' batteries, but an optional AC 9V power adaptor is available.
The meter supports externally connected Type K or Type J thermocouples.
Press and hold the FUNCTION key for at least 1.5 seconds to switch between Air Velocity, Thermocouple Temperature, and Air Volume modes.