This document is a user manual for Lenovo Wanco servers, including safety warnings and precautions. The document provides information about the features and characteristics of the product.
This manual provides safety warnings, hardware specifications, and detailed instructions for installing and configuring the Lenovo T168 G2 / T468 G2 rack‑mount servers. It is intended for experienced technicians and includes sections on system architecture, component installation, BIOS settings, and RAID configuration.
The document also contains operating‑system installation guides for Windows and Linux, a comprehensive FAQ, and a glossary of server‑related terminology to assist users in daily operation and maintenance. This manual is written in Chinese.
| Processor | Intel Xeon 3.0~3.6 GHz, 800 MHz front‑side bus |
|---|---|
| Memory | ECC Registered DDR‑II 400 SDRAM, up to 12 GB (6 × 2 GB) |
| Storage Controller | Ultra320 SCSI controller, RAID 0/1/5, up to 6 hot‑plug SCSI drives |
| Network | Dual Gigabit Ethernet ports |
| Power Supply | 550 W single, 1+1 redundant hot‑plug configuration |
| Dimensions | 88 mm × 430 mm × 660 mm (H × W × D) |
| Weight | 20 kg – 28 kg depending on configuration |
| Operating Temperature | 10 °C – 35 °C |
| Operating Humidity | 35 % – 80 % relative humidity |
First turn off the modem power switch, then shut down the server.
Either remove the securing screws and pull the server out enough to open the panel, or detach the panel as described in the System Structure section.
Use a sine‑wave UPS; avoid using a square‑wave offline UPS.