The user manual for the TSP600 series thermal printer provides information on the printer's components and terminology, consumables and AC adapter, connection cables and AC adapter, control panel and other functions, paper loading, adjustment of paper near end sensor, and prevention and clearing of paper jams.
This manual provides detailed instructions for installing and operating the TSP600 Series thermal receipt printer, including component descriptions, power requirements, and connection methods. It also explains how to load paper, adjust sensors, prevent and clear jams, and perform regular cleaning.
Appendices contain full technical specifications, DIP switch settings, interface wiring diagrams, and optional accessories, helping technicians and end‑users configure the printer for various POS environments. This manual is written in Chinese.
| Printing method | Direct thermal |
|---|---|
| Maximum printing speed | 800 dots/s (100 mm/s) |
| Resolution | 203 dpi (8 dots/mm) |
| Maximum print width | 72 mm |
| Supported paper width | 79.5 ± 0.5 mm (optional 57.5 ± 0.5 mm) |
| Paper roll diameter | ≤ 90 mm |
| Overall dimensions (W×D×H) | 142 mm × 199 mm × 132 mm |
| Weight | ≈ 1.4 kg |
| Operating noise | 53 dB (auto‑cutter) / 49 dB (tear‑paper) |
| Cutting frequency (auto‑cutter mode) | up to 20 cuts/min |
| Input voltage | DC 24 V ± 10 % |
| Operating current | ≈ 1.3 A (typical) |
| Optional AC adapter model | PS60-24A, 100‑240 V AC, 24 V DC ± 5 %, 2.0 A |
The printer is designed for thermal paper with a thickness of 65 µm to 85 µm.
Open the cover, locate the jammed paper, and follow the steps in section 7‑2 ‘清除卡纸’ to remove it safely.
The optional AC adapter is model PS60‑24A, providing 24 V DC output at up to 2.0 A.
The printer can print up to 800 dots per second, equivalent to 100 mm per second.