Key facts
- Manuals
- 45
- Models
- 5
- Categories
- 1
- Languages
- ZH · EN
- Last added
- 2026-10-03
Star Micronics models by category
Featured Star Micronics manuals
Star Micronics SP320-2 Dot Matrix Printer User Manual
This user manual covers everything needed to get the Star Micronics SP320-2 dot‑matrix printer up and running. It includes step‑by‑step instructions for unboxing, installing interface and power cables, loading the ribbon cartridge and paper, and operating the control panel.
The document also lists the printer’s technical specifications, environmental limits, and safety warnings to ensure reliable and safe use in a variety of work environments. This manual is written in Chinese.
Covers: Unboxing and Installation · Components and Terminology · Cable Installation · Ribbon and Paper Loading · Operation Panel · Specifications
Star NX-750 Printer Operation Manual
This manual explains how to install the Star NX-750 printer, including placement, removal of packaging, and connection of power and data cables. Detailed steps cover mounting the printer, installing the ribbon, and configuring the printer settings.
It also describes the control panel functions, operation modes, maintenance procedures, and troubleshooting tips. Safety warnings, warranty information, and contact details for service support are included. This manual is written in Chinese.
Covers: Installation · Printer Placement · Control Panel Overview · Operation Modes · Maintenance · Troubleshooting
Star Micronics NX-650 Printer User Manual
This manual covers the essential information for installing and using the Star Micronics NX-650 printer, including safety precautions, hardware layout, and basic operation procedures.
Additional sections provide detailed guidance on troubleshooting, routine maintenance, and technical specifications to help users keep the printer running efficiently.
Covers: Preface · Front Panel Overview · Installation · Operation · Maintenance · Troubleshooting
Star Micronics NX-410 Printer User Manual
This manual covers everything needed to set up and use the Star Micronics NX-410 receipt printer, including unpacking, installation, driver setup, paper handling, control panel functions, and adjustment modes. Detailed troubleshooting and maintenance procedures are also provided.
The appendix contains technical specifications such as print head details, supported character sets, and paper dimensions, as well as wiring diagrams for the parallel interface. This manual is written in Chinese.
Covers: Installation · Paper Handling · Control Panel · Printer Settings · Driver Installation · EDS Settings
Latest Star Micronics manuals
Star Micronics SP320-2 Dot Matrix Printer User Manual
User Manual 2 pages · 1.5 MB · ZHThe manual provides setup, operation, specifications and safety instructions for the Star Micronics SP320-2 dot‑matrix printer.
Star Walk user manual
Star Walk™ is a stargazing application for amateurs, professionals, and kids who are eager to learn. The app allows users to identify about 250,000 heavenly bodies and learn about them, watch moon phases, meteor showers, see daily sunset and sunrise times, elevation angle, and daily hours of sunlight as well as the data for all main planets. Star Walk™ is an excellent guide to the world of astronomy that allows you to learn the secrets of our Universe just sitting comfortably in the arm-chair or during stargazing out.
Star Chromatography Workstation Version 6 Manual
This document is the operation manual for Varian Analytical Instruments' Star Chromatography Workstation Version 6 data handling and reports. It provides detailed instructions on using the software to process and analyze chromatographic data, and generate reports. The software offers an interactive graphics interface for viewing chromatograms, editing peaks and events, and calculating results.
star DP8340 SERIES user manual
This document provides the user manual for the DOT MATRIX PRINTER DP8340 series [serial interface]. The equipment has been tested and complies with the limits for a Class A digital device according to Part 15 of the FCC Rules. These limits are designed to protect against harmful interference when the equipment is used in a commercial environment. The equipment may cause harmful interference to radio communications if not installed and used according to the instruction manual. The use of shielded cable is required for compliance with the Federal Noise Interference Standard. This statement applies to printers marketed in the USA. The digital apparatus also complies with the Class A limits for radio noise emissions set out in the Radio Interference Regulations of the Canadian Department of Communications.
star DP8340R SERIES user manual
This document is the user manual for the DOT MATRIX PRINTER DP8340R SERIES [SERIAL INTERFACE], which includes information about the Federal Communications Commission Radio Frequency Interference Statement and the Canadian Department of Communications Radio Interference Regulations.
star DP8340RC SERIES user manual
This manual introduces the use of HP DP8340RC series dot matrix printer.
star LC-100 + COLOUR Manual
The LC-100 is a colour dot matrix printer that complies with the European Community's directives on electromagnetic compatibility and low voltage. It features excellent noise control and superior print quality.
star LC-1011C LC-100 + COLOUR Manual
This document is the user manual for the LC-1011C LC-100 Color + HL 80825190 Dot Matrix Printer. It provides information on the Federal Communications Commission's radio frequency interference statement and compliance requirements for the printer.
star LC-1511 LC-1521 Manual
This manual introduces the use of LC-1511 LC-1521 HA15 80825072 DOT MATRIX PRINTERS
star LC-240C LC-240 DOT MATRIX PRINTER IMPRIMANTE MATRICIELLE PUNKT-MATRIX-DRUCKER STAMPANTE AD AGHI Manual
This document is LC-240C dot matrix printer user manual
star LC-4511 LC-4521 DOT MATRIX PRINTERS IMPRIMANTES MATRICIELLES PUNKT-MATRIX-DRUCKER STAMPANTI AD AGHI Manual
This document is a user manual for the LC-4511 and LC-4521 dot matrix printers. The manual includes usage instructions and EC compliance declarations.
star LC-4522 DOT MATRIX PRINTERS Manual
LC-4522 is a dot matrix printer produced by Canon. This document is its user manual.
star LC-500 DOT MATRIX PRINTER Manual
LC-500 is a dot matrix printer produced by Star Micronics Co., Ltd. This printer supports ESC/POS commands.
star LC-7211 DOT MATRIX PRINTER IMPRIMANTE MATRICIELLE PUNKT-MATRIX-DRUCKER STAMPANTE AD AGHI Manual
The LC-7211 is a dot matrix printer that conforms to international standards. It utilizes dot matrix printing technology. This printer has good electromagnetic compatibility and operates at low voltage.
star LC-8021 DOT MATRIX PRINTER USER S MANUAL
This manual describes how to set up, use, and care for the Star LC-8021 printer.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Service Manual
Disassembly, diagnostics and part numbers, for repair.
Questions answered in Star Micronics manuals
What is the recommended operating temperature range for the SP320-2 printer?
The printer can operate in temperatures from 0 °C up to +50 °C.
Which interface cables are supported by the SP320-2?
The printer supports both serial and parallel interface cables.
What is the warranty period for the Star NX-750 printer?
The printer comes with a three‑year warranty.
What voltage does the printer require?
The printer requires a 220 V power source.
What is the model number of the printer?
The printer model is NX-650.
Who manufactures the NX-650 printer?
The printer is manufactured by Star Micronics.