Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
The handswitch of the HF instrument is pressed while switching on. The manual's first action is: “Release the handswitch of the HF instrument.”
The handswitch of the HF instrument is pressed while switching on. The manual's first action is: “Release the handswitch of the HF instrument.”
The footswitch pedal is pressed while switching on. The manual's first action is: “Release the footswitch pedal.”
The footswitch pedal is pressed while switching on. The manual's first action is: “Release the footswitch pedal.”
The push button was pressed while switching on or there is a malfunction. The manual's first action is: “Release the push button.”
The footswitch combination error E019 indicates two single or double pedal footswitches are connected or the generator is malfunctioning. The manual's first action is: “Ensure that only one single pedal and / or only …
The system detected non-conductive fluid during bipolar cutting. The manual's first action is: “Ensure that conductive fluid is used during bipolar resection procedure.”
The system detected a short circuit in the HF instrument or its connection. The manual's first action is: “Ensure that the electrodes of the HF instrument do not touch each other.”
The HF instrument or its connection may have no proper tissue contact or be malfunctioning. The manual's first action is: “Ensure that the electrodes of the HF instrument have proper tissue contact.”
The neutral electrode contact is insufficient or malfunctioning. The manual's first action is: “output may not be activated. In this case the touch-screen will display an error window ("Insufficient neutral electrode …
All 45 error codes of the Olympus ESG-400 electrosurgical generator with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
The Smart Transmitter Interface has no burst data for the requested channel. The manual lists no action for this code.
The Smart Transmitter Interface has not received a response from a field device after exhausting all retry attempts. The manual lists no action for this code.
The Smart Transmitter Interface is not receiving burst data from a field device in burst mode. The manual lists no action for this code.
The length of the DF1 packet is not consistent with the length specification in that packet. The manual lists no action for this code.