Error Codes

Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 880B: The registration sensor is ON when you turn on the power or after you open…

  The registration sensor is ON when you turn on the power or after you open and close the control panel ASSY. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8809: Before the start of paper feeding, the registration sensor is already ON.

  The registration sensor is already ON before paper feeding starts. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8303: Although recording paper has been fed by 360 mm after the start of…

  The registration sensor is still ON after 360 mm of recording paper has been fed. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 82xx: Although recording paper has been fed by 150 mm after the start of…

  The registration sensor is still OFF after 150 mm of recording paper has been fed. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8105: After coming ON, the cam sensor cannot go OFF even if the switching cam…

  The cam sensor cannot go OFF after coming ON even if the switching cam turns reverse. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8104: The cam sensor cannot detect the home position of the switching cam even…

  The cam sensor cannot detect the home position of the switching cam even after one full turn of the cam. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8103: At the unexpected timing, the cam sensor detects the switching cam being in…

  The cam sensor detected the switching cam at an unexpected timing while in the home position. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8102: The cam sensor sticks to ON.

  The cam sensor sticks to ON. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error 8101: The cam sensor sticks to OFF.

  The cam sensor sticks to OFF. The manual lists no action for this code.

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error FF: Memory management error.

  Memory management error indicates a defective main PCB. The manual's first action is: “Replace the main PCB.”

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error F5: Internal software error.

  Internal software error. The manual's first action is: “Replace the main PCB.”

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error F3: Internal software error.

  Internal software error. The manual's first action is: “Replace the main PCB.”

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error EA: Document removed at phase B.

  Document removed at phase B. The manual's first action is: “Correct the surrounding parts on which the actuator caught.”

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error E8: Data scanning error during transmission.

  Data scanning error during transmission. The manual's first action is: “Replace the CIS unit.”

• CodeBrother FAX-575 FAX-T102/T104/T106 FAX-817/827/837MC FAX-878 Error E6: Write error in EEPROM.

  Write error in EEPROM. The manual's first action is: “Replace the main PCB.”