Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
Axis speed sensor Abnormality(only applied to torque sensor ) indicates a problem with the axis speed sensor linked to the torque sensor on the KT-LCD 10YN. The manual lists no action for this code.
Torque sensor Signal Abnormality shows that the torque sensor on the KT-LCD 10YN is not providing accurate readings. The manual lists no action for this code.
Motor Hall Signal Abnormality means the motor's hall sensor is sending incorrect signals to the controller. The manual lists no action for this code.
Throttle Abnormality indicates an issue with the throttle signal on the KT-LCD 10YN. The manual lists no action for this code.
All 5 error codes of the KT KT-LCD 10YN eBike Special Meter with their meaning, causes and what to do, taken from the manufacturer's manual with page references.
Primary exchanger needs cleaning; contact technical assistance. The manual's first action is: “Signal”
Delivery water temperature is too high, or the return-delivery probe differential is faulty. The manual's first action is: “Block”
Return probe is faulty due to an open or short circuit. The manual's first action is: “Stop”
Delivery probe is faulty due to an open or short circuit. The manual's first action is: “Stop”
Domestic hot water probe has failed. The manual's first action is: “See dedicated section”
Boiler mode configuration is missing the required jumper setting. The manual's first action is: “Block”
Generic electronic fault has occurred. The manual's first action is: “Block”
System water pressure is too low. The manual's first action is: “Block”
System water pressure is too low after 10 minutes have passed. The manual's first action is: “Block”
Fan speed sensor has failed. The manual's first action is: “Block”