Error, fault and alarm codes of products - what each code means, its causes and what to do - read from the manufacturers’ manuals, with the manual page each answer comes from.
Memory in the inverter is corrupted, causing system errors. The manual lists no action for this code.
Stall preventive function was activated during constant-speed operation and stopped the motor. The manual lists no action for this code.
Brake transistor fault detection occurred indicating a brake transistor malfunction. The manual lists no action for this code.
Cooling fan failed to rotate, causing operational issues. The manual lists no action for this code.
Instantaneous power failure protective function was activated due to a sudden power loss. The manual lists no action for this code.
Electronic thermal relay in the inverter was activated because current exceeds 150% of preset current. The manual lists no action for this code.
Electronic thermal relay in the inverter was activated because current is below 150% of preset current. The manual lists no action for this code.
Braking regenerative power from motor exceeded the regenerative overvoltage limit. The manual lists no action for this code.
Inverter output current exceeded overcurrent limit during deceleration. The manual lists no action for this code.
Inverter output current exceeded overcurrent limit during constant-speed operation. The manual lists no action for this code.
Inverter output current exceeded overcurrent limit during acceleration. The manual lists no action for this code.
Stall prevention is activated because the motor is overloaded and load must be lightened. The manual's first action is: “Is motor overloaded? Lighten load.”
Inverter thermal relay triggers from an overload alarm. The manual lists no action for this code.
Motor thermal relay activates due to motor overload. The manual's first action is: “Lighten load.”
Deceleration overcurrent happens when deceleration is too fast or there’s an output short-circuit. The manual's first action is: “Prolong deceleration time.”