Mitsubishi Electric MDS-C1 Series Error 75: Overvoltage

AC Servo/Spindle · taken from the manufacturer’s manual, pages cited

Error code75

Overvoltage alarm is triggered when main circuit PN bus voltage exceeds tolerable levels. The manual's first action is: “NR”

Model
Mitsubishi Electric MDS-C1 Series
Display shows
Overvoltage (75)
Type
Error code
Source
Manual p. 312

What 75 means

Overvoltage p. 312

Common causes

  • The main circuit PN bus voltage exceeded the tolerable value. p. 312
  • The alarm occurs each time the motor decelerates. p. 312
  • The alarm occurs occasionally. p. 312
  • Auxiliary regeneration frequency over (E8) occurs just before the overvoltage occurs. p. 312
  • Others. p. 312
  • The power capacity is insufficient. p. 312
  • The specified power capacity is secured. p. 312
  • Is the voltage 170V or more even when the motor is accelerating? p. 312
  • The voltage drops to 170V or less occasionally. p. 312
  • The difference of the voltage across wires is 10V or more. p. 312
  • The difference of the voltage across wires is less than 10V. p. 312
  • The power voltage is distorted. p. 312
  • The power voltage waveform is not abnormal. p. 312
  • No abnormality is found in particular. p. 312

What to do

  1. NR p. 312
  2. Investigate item 3. p. 312
  3. Investigate item 2. p. 312
  4. Limit the occurrence of the excessive instantaneous regeneration by not decelerating multiple axes at the same time. p. 312
  5. Increase the power capacity. p. 312
  6. Investigate item 4. p. 312
  7. Improve the power phase balance. p. 312
  8. Investigate item 5. p. 312
  9. Improve the source of the distortion. Install an AC reactor. p. 312
  10. Investigate item 6. p. 312
  11. Replace the unit. p. 312

Before you service the product, read the safety instructions in the manual p. 4.

If 75 is still not resolved

  • contact service / dealer p. 5
    “Wiring, maintenance and inspection work must be done by a qualified technician.”

This page summarises what the manufacturer’s manual says about 75; each statement links to the page it comes from, and quoted lines are copied word for word. It is not a substitute for the manual or for a qualified installer. ManualLib is not affiliated with Mitsubishi Electric. Found a mistake? Report an error.