Industrial

PEMB4 is a PNP double transistor produced by Philips Semiconductors. The features are 300mW total power dissipation, 1.6mm × 1.2mm × 0.55mm ultra-thin package, excellent coplanarity, reduced number of components, saved board space, and reduced pick and place costs

The AD587 is a high precision 10V reference with high accuracy and low noise, which can be used in various circuits requiring 10V reference

This is a preliminary specification file for Philips SAA7124 and SAA7125 digital video encoders (ECO-DENC).

The document describes the features and characteristics of the IXYS IXDN404 / IXDI404 / IXDF404 products, including the use of CMOS and IXYS HDMOSTM processes, high peak output current, wide operating range, and strong driving capability.

This product is a phototransistor from Vishay Telefunken. It can be used as a photoelectric switch or photoelectric sensor

This document introduces a series of fast recovery glass rectifier products that are hermetically sealed with voidless-glass construction. They are ideal for high-reliability applications where a failure cannot be tolerated. These products have a rated current of 3.0 amps and working peak reverse voltages from 50 to 600 volts. They feature an internal 'Category I' metallurgical bond and are sealed with voidless-glass construction. In addition, other rectifier products with different current ratings and recovery time requirements are also available.

This document describes the features and characteristics of Analog Devices AD73311, a low-cost, low-power CMOS general-purpose analog front end. The product features a 16-bit A/D and D/A converter, programmable input/output sample rates, high SNR, low group delay, etc.

KM681000E is a low power CMOS static RAM produced by SAMSUNG. It supports various operating temperature ranges and has various packaging types for user flexibility in system design. The family also supports low data retention voltage for battery back-up operation with low data retention current.

QT1080 8 KEY QTOUCH™ SENSOR IC is an IC chip for touch screen with 8 touch points

This product is a 1550nm 2.5Gbps laser diode module with a multi-quantum-well structure. It does not require cooling and can operate at temperatures of -40~+85ºC.

The MAX3738 is a +3.3V laser driver designed for multi-rate transceiver modules with data rates from 155Mbps to 2.7Gbps. Lasers can be DC-coupled to the MAX3738 for reduced component count and ease of multirate operation. Laser extinction ratio control (ERC) combines the features of automatic power control (APC), modulation compensation, and built-in thermal compensation. The APC loop maintains constant average optical power. Modulation compensation increases the modulation current in proportion to the bias current. These control loops, combined with thermal compensation, maintain a constant optical extinction ratio over temperature and lifetime. The MAX3738 accepts differential data input signals. The wide 5mA to 60mA (up to 85mA AC-coupled) modulation current range and up to 100mA bias current range, make the MAX3738 ideal for driving FP/DFB lasers in fiber optic modules. External resistors set the required laser current levels. The MAX3738 provides transmit disable control (TX_DISABLE), single-point fault tolerance, bias-current monitoring, and photocurrent monitoring. The device also offers a latched failure output (TX_FAULT) to indicate faults, such as when the APC loop is no longer able to maintain the average optical power at the required level. The MAX3738 is compliant with the SFF-8472 transmitter diagnostic and SFP MSA timing requirements. The MAX3738 is offered in a 4mm x 4mm, 24-pin thin QFN package and operates over the extended -40°C to 85°C ambient temperature range, and at a supply voltage of 3.3V.

The TPS6102x series is a high efficiency synchronous boost converter with an adjustable output voltage, an input voltage range of 0.9V to 6.5V, and an output current of up to 200mA. It can be used for products powered by a single-cell, two-cell, or three-cell alkaline, nickel cadmium, or nickel metal hydride battery, or it can be used to generate 5V at 500mA from a 3.3V or Li-Ion battery.

The MAX1709 is a high-power step-up DC-DC converter that delivers up to 20W at a fixed (3.3V or 5V) or adjustable (2.5V to 5.5V) output from a +0.7V to +5V supply.

The LTC3736 is a 2-phase dual synchronous step-down switching regulator controller with tracking that drives external complementary power MOSFETs using few exter- nal components. The constant frequency current mode architecture with MOSFET VDS sensing eliminates the need for sense resistors and improves efficiency. Power loss and noise due to the ESR of the input capacitance are significantly reduced.

M45PE10 is a 1-megabit page-erasable serial flash memory with byte-alterability and a 75 MHz SPI bus interface.