Industrial

ispGDX TM240VA is a 3.3V Generic Digital Crosspoint that is programmable in system. It features an advanced architecture that addresses programmable PCB interconnect, bus interface integration and jumper/switch replacement.

ispGDX TM160V/VA is a family of In-System Programmable 3.3V Generic Digital Crosspoint. Its features include “Any Input to Any Output” Routing, Fixed HIGH or LOW Output Option for Jumper/DIP Switch Emulation, Space-Saving PQFP and BGA Packaging, Dedicated IEEE 1149.1-Compliant Boundary Scan Test, etc.

ispGDX is a family of high-performance digital crosspoint that features 5V power supply, 5.0ns input-to-output/5.0ns clock-to-output delay, low power consumption, programmable clock, programmable output resistance, etc.

The ispGDS22/18/14 is a high-speed, flexible, in-system programmable Generic Digital Switch from Lattice Semiconductor. It can be used to reconfigure system signal routing, replace DIP switches, configure I/O boards' addresses, select clock sources, etc.

The document describes the features and characteristics of the ispGAL22V10 product, including programmable interface, high performance technology, logic macrocells, etc. The product is suitable for applications such as DMA control, state machine control, high-speed graphics processing, and software-driven hardware configuration.

ispGAL®22LV10 is a PLD device from Lattice Semiconductor Corp. that features high performance and low power consumption. It is manufactured using E2CMOS® technology and has a maximum propagation delay of 4 ns and a 3.3V low voltage interface standard. The device also has more than 10,000 program/erase cycles and is compatible with standard 22LV10/22V10 devices.

The ispClock 5600 family is an in-system programmable, zero-delay clock generator with a universal fan-out buffer. It operates in the range of 10MHz to 320MHz and offers low output to output skew (<50ps) and low jitter peak-to-peak (<60ps). It has up to 20 programmable fan-out buffers with various programmable features such as output standards, output impedance, slew rate, and individual enable controls. The family also includes a fully integrated high-performance PLL with programmable lock detect and multiply/divide ratio control. It supports precision programmable phase adjustment per output, up to five clock frequency domains, and flexible clock reference and external feedback inputs.

ispLSI 2032E is a high-density, fast, easy-to-use, in-system programmable PLD with 1000 PLD gates, 32 I/O pins, two dedicated inputs, 32 registers, high-speed global interconnect, wide input gating for fast counters, state machines, address decoders, etc.

The ISP1761 is a single-chip Hi-Speed Universal Serial Bus (USB) On-The-Go (OTG) Controller integrated with the advanced Philips Slave Host Controller and the Philips ISP1582 Peripheral Controller. The Hi-Speed USB Host Controller and Peripheral Controller comply to Universal Serial Bus Specification Rev. 2.0 and support data transfer speeds of up to 480 Mbit/s. The Enhanced Host Controller Interface (EHCI) core implemented in the Host Controller is adapted from Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0. The OTG controller is compliant with On-The-Go Supplement to the USB Specification Rev. 1.0a. The ISP1761 has three USB ports. Port 1 can be configured to function as a downstream port, an upstream port or an OTG port; ports 2 and 3 are always configured as downstream ports. The OTG port can switch its role from host to peripheral, and peripheral to host. The OTG port can become a host through the Host Negotiation Protocol (HNP) as specified in the OTG supplement.

This document introduces the ISP1760 USB Host Controller, which is a generic processor interface that supports high/full/low-speed transfer modes and can connect three different devices.

The ISP1582 is a cost-optimized and feature-optimized Hi-Speed Universal Serial Bus (USB) peripheral controller. It fully complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at high-speed (480 Mbit/s) and full-speed (12 Mbit/s).

The ISP1581 is a cost-optimized and feature-optimized Universal Serial Bus (USB) interface device, which fully complies with the Universal Serial Bus Specification Rev. 2.0. It provides high-speed USB communication capacity to systems based on a microcontroller or microprocessor. The ISP1581 communicates with the system’s microcontroller/processor through a high-speed general-purpose parallel interface. The ISP1581 supports automatic detection of USB 2.0 system operation. The USB 1.1 fall-back mode allows the device to remain operational under full-speed conditions. It is designed as a generic USB interface device so that it can fit into all existing device classes, such as: Imaging Class, Mass Storage Devices, Communication Devices, Printing Devices and Human Interface Devices. The internal generic DMA block allows easy integration into data streaming applications. In addition, the various configurations of the DMA block are tailored for mass storage applications. The modular approach to implementing a USB interface device allows the designer to select the optimum system microcontroller from the wide variety available. The ability to re-use existing architecture and firmware investments shortens the development time, eliminates risk and reduces costs. The result is fast and efficient development of the most cost-effective USB peripheral solution.

The ISP1561 is a PCI-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core and four transceivers that are compliant with Hi-Speed USB and Original USB. The functional parts of the ISP1561 are fully compliant with Universal Serial Bus Specification Rev. 2.0, Open Host Controller Interface Specifications Rev. 1.0a, Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 0.95, PCI Local Bus Specification Rev. 2.2 and PCI Bus Power Management Interface Specification Rev. 1.1. The integrated high performance USB transceivers enable the ISP1561 to handle all Hi-Speed USB transfer speed modes: high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1561 provides four downstream ports that enables simultaneous connections of USB devices at different speeds. The ISP1561 provides three downstream port status indicators—GoodLink™ along with green and amber LEDs—to allow user-rich messages of the Root Hub downstream ports status, without requiring detailed port information to be reflected in the internal registers. The ISP1561 is fully compatible with various operating system drivers, such as Microsoft® Windows® standard OHCI and EHCI drivers that are present in Windows 98 Second Edition (SE)

ISP1520 is a USB 2.0 high-speed hub controller chip from ISP company, supports high-speed, full-speed and low-speed data transmission, can be connected to USB host or hub.

ISP1501 is a USB peripheral high-speed transceiver chip of ISP company, which supports USB2.0 standard, has parallel to serial converter and serial to parallel converter, supports 12MHz crystal, has 3.3V and 5V digital input interface