Industrial

BB403M is an individual type number of HITACHI BBFET, it is a MOS FET IC VHF/UHF RF Amplifier with build in Biasing Circuit. It has high forward transfer admittance (|yfs|=42 mS typical value, f=1kHz) and built in ESD absorbing diode, which can withstand up to 250V at C=200pF, Rs=0 conditions.

BB15AW-FA is the supplier of BB15AW-FA

BAV19W THRU BAV21W are 410mW small signal diodes rated for 120 to 250 volts. These diodes are silicon epitaxial planar devices and are suitable for general purpose use and are available in other case styles.

The B7735 is a low loss filter for mobile communication. It features low amplitude ripple, usable passband of 35 MHz, unbalanced to balanced operation, excellent symmetry, impedance transformation from 50 Ohm to 150 Ohm, and is suitable for GPRS class 1 to 12.

This document describes the features and characteristics of the B32656S series metallized polypropylene film capacitors produced by EPCOS AG. These capacitors have high pulse strength and high contact reliability, stable capacitance value, and are suitable for applications such as IGBT snubbering. The capacitors are constructed with polypropylene film dielectric and wound capacitor technology with internal series connection. They have a plastic case with good sealing properties and strap terminals made of tinned copper with low inductance. The B32656S series offers a range of options with wide rated voltage range.

AZ100ELT21 is a PECL to CMOS/TTL translator from AZmicrotek. It uses PECL levels and only needs VCC and ground power. It supports 3.0V to 5.5V voltage range and can directly replace ON Semiconductor's MC100ELT21. It is suitable for applications where space, performance and low power are at a premium.

This datasheet provides detailed information on the features of the 74ALVT16541, including 16-bit universal bus interface, 5V I/O compatibility, 3-state buffers, output capability, TTL input and output switching levels, input and output interface capability to systems at 5V supply, Bus-hold data inputs, live insertion/extraction permitted, power-up 3-state, no bus current loading when output is tied to 5V bus, latch-up protection exceeds 500mA per JEDEC Std 17, ESD protection exceeds 2000V per MIL STD 883 Method 3015 and 200V per Machine Model

The ASM5P23S04A is a versatile 3.3V zero-delay buffer designed to distribute high-speed clocks in PC, workstation, datacom, telecom, and other high-performance applications. It features zero input-output propagation delay, multiple low-skew outputs, and multiple configurations. The output-output skew is less than 200pS, and the device-device skew is less than 500pS. It operates on advanced 0.35µ CMOS technology and is available for industrial temperature use.

The ASM3P623S00A/B/C/D/E/F is a high performance, low jitter clock buffer with zero input-output propagation delay, output skew less than 250ps, device-device skew less than 700ps.

This document describes the features and characteristics of CERAMIC SURFACE-MOUNT • 21.4MHz and 45MHz FUNDAMENTAL MONOLITHIC CRYSTAL FILTERS ASCF21U and ASCF45U, which are suitable for applications such as mobile communication systems, pagers, cellular and cordless phones, and radios.

AS7C252MFT18A is a 2.5V 32 Mb Synchronous SRAM with the following features: Organization: 2,097152 words × 18 bits, Fast clock to data access time: 7.5/8.5/10 ns, Fast OE access time: 3.5/4.0 ns, Fully synchronous flow-through operation, Asynchronous output enable control, Available in 100-pin TQFP package, Individual byte write and global write, Multiple chip enables for easy expansion, 2.5V core power supply, Linear or interleaved burst control, Snooze mode for reduced power-standby, Common data inputs and data outputs.

The AS2431 is a three-terminal adjustable shunt regulator providing a highly accurate bandgap reference. The adjustable shunt regulator is ideal for a wide variety of linear applications that can be implemented using external components to obtain adjustable currents and voltages. In the standard shunt configuration, the combination of low temperature coefficient (TC), sharp turn-on characteristics, low output impedance and programmable output voltage make this precision reference an excellent error amplifier.

The APR3101/2/3 are designed to monitor voltage supplies in µP and digital systems. The quiescent current is extremely low, typically 1.5 µA, making it ideal for portable battery operated equipment. The APR3101/2/3 operate by monitoring the system power supply voltage. When the input voltage drops below a fixed threshold or whenever manual reset is asserted, the device asserts a reset signal for a fixed time period after Vcc rises above the fixed threshold or manual reset is deasserted. The APR3101/2/3 series is available with three output stage versions: APR3101 push-pull active low output, APR3102 push-pull active high output.