Industrial

The CS4202 is an AC '97 2.2 compliant stereo audio codec designed for PC multimedia systems. It uses industry-leading delta-sigma and mixed signal technology. This advanced technology and these features are designed to help enable the design of PC 99 and PC 2001 compliant high-quality audio systems.

This reference manual introduces the safety information, installation, flow measurement principle and basic operation of the Agilent Flow Tracker Series 1000/2000 products.

This manual introduces the basic operation and use of the Agilent G3163A Real-Time Gas Analyzer

The CS18LV20483 is a high performance, high speed, and super low power CMOS Static Random Access Memory organized as 262,144 words by 8 bits and operates from a wide range of 2.7 to 3.6V supply voltage. Advanced CMOS technology and circuit techniques provide both high speed and low power features with a typical CMOS standby current of 0.50uA and maximum access time of 55/70ns in 3.0V operation. Easy memory expansion is provided by an active LOW chip enable inputs (/CE1,CE2) and active LOW output enable (/OE) and three-state output drivers. The CS18LV20483 has an automatic power down feature, reducing the power consumption significantly when chip is deselected. The CS18LV20483 is available in JEDEC standard 32-pin sTSOP (8x13.4 mm), TSOP (8x20mm), TSOP (II) (400mil) and SOP (450 mil) packages.

This manual introduces the installation method of the Agilent TCD column ferrule sealing system.

This document provides instructions and notices for the use of Agilent Technologies' Agilent Inlet EPC Leak Test Gas Chromatographs product.

The CNY70 is a reflective optical sensor with a compact construction. It is suitable for optoelectronic scanning and switching devices. It operates at a wavelength of 950nm and provides a high signal output with a low temperature coefficient.

The document describes the features and characteristics of the CENTRAL SEMICONDUCTOR CMPZDC2V4 series silicon dual zener diode, which is a voltage regulator commonly used in industrial, commercial, entertainment, and computer applications.

The CMM6003-SC is a high dynamic range amplifier designed for applications operating within the 50 MHz to 870 MHz frequency range. It is an ideal solution for transmit and receive functions where high linearity is required. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of gain flatness, bandwidth, low NF and high IP3 at the same bias point make it an ideal transmit or receive solution when used in intermediate frequency applications. The CMM6003-SC is packaged in a low-cost, space efficient, surface mount SOT-89 package which provides excellent electrical stability and low thermal resistance. All devices are 100% RF (at 800 MHz) and DC tested.

This document is the user manual for the pneumatics control module, which is an accessory for the 6890 gas chromatograph (GC).

CM2831 300mA CMOS LDO WITH ENABLE is a low-power, low-dropout, high-output-accuracy voltage regulator developed by Champion Microelectronic Corporation, suitable for battery-powered devices such as portable electronic devices and mobile phones.

This note describes the operation of two Agilent 1100 autosamplers in a 1100 system. In order to achieve a high sample throughput both autosamplers are used. While one of the autosamplers is injecting, the other one is in the by-pass position and vice versa.

This document describes the operation procedures of Agilent 7890B GC / FID, including system preparation, sample preparation, instrument startup and operation.

The CLC5506 is a low-noise programmable gain amplifier for use in cellular base stations, WLL, radar and RF/IF subsystems where gain-control is required to increase the dynamic range. The CLC5506 allows designers to compensate for manufacturing component tolerances and temperature variations in receiver front ends. Maximum amplifier gain is set at 26 dB . A three-line MICROWIRE serial interface allows 16 dB of attenuation from the max gain setting in precise 0.25 dB steps. The CLC5506 uses a differential input and output, allowing large output swings on a single 5V rail. The differential output is well suited for impedance matching networks driving SAW filters or directly driving differential input analog to digital converters (ADC). The differential output also makes it possible to drive transformers allowing designers the ability to match a wide variety of transmission lines. The output amplifier has excellent output drive with low distortion. Digital control of the CLC5506 is accomplished using MICROWIRE Interface. Data Out and a Load Enable are incorporated so that more than one CLC5506/channel may be programmed per system. The CLC5506 maintains a 600MHz performance bandwidth over its entire gain and attenuation range from +10dB to +26dB. Gain control is divided into 64 equal steps of 0.25dB and is dB-linear. Output drive and distortion performance are excellent; In a 50Ω system, the third-order output harmonic distortion is less than -80dBc.

This document is about how to set up Agilent 6850 GC. It introduces how to install and connect Agilent 6850 GC, including connecting cables, gas sources, samples, etc.