Industrial

This document is the product manual for AT-32011 and AT-32033, two low current high performance NPN silicon bipolar transistors. These two products are optimized for maximum ft at low voltage operation, making them ideal for use in battery powered applications in wireless markets.

ASMC-PxB9-Txxxx Envisium Power PLCC-4 Surface Mount LED Data Sheet is the data sheet of Envisium series of mid-power LEDs manufactured by Agilent and Lumileds. It has high reliability package, mid-power intensity brightness, high light efficiency, higher ambient temperature, super wide viewing angle, compatible with IR and TTW soldering process.

ASM5P2304B is a versatile, 3.3V zero-delay buffer designed to distribute high-speed clocks in PC, workstation, datacom, telecom and other high-performance applications.

The ASM3P2769A is a versatile spread spectrum frequency modulator designed specifically for a wide range of clock frequencies. The ASM3P2769A reduces electromagnetic interference (EMI) at the clock source, allowing system wide reduction of EMI of all clock dependent signals. The ASM3P2769A allows significant system cost savings by reducing the number of circuit board layers ferrite beads, shielding that are traditionally required to pass EMI regulations. The ASM3P2769A uses the most efficient and optimized modulation profile approved by the FCC and is implemented by using a proprietary all digital method. The ASM3P2769A modulates the output of a single PLL in order to “spread” the bandwidth of a synthesized clock, and more importantly, decreases the peak.

The ASM3P2760A is a low-power peak electromagnetic interference (EMI) reducing solution. It generates an EMI optimized clock signal at the output and has integrated loop filter components. The product operates with a 3.3V/2.5V supply and has an operating current less than 4mA. It features a low power CMOS design and an input frequency range of 6MHz to 12MHz for 2.5V and 6MHz to 13MHz for 3.3V. The ASM3P2760A generates a 1X low EMI spread spectrum clock of the input frequency with a frequency deviation of ±0.65% @ 8MHz. It is available in 6 pin TSOT-23, 8 pin SOIC, and 8 pin TSSOP packages.

AS7C4098 is a 5V/3.3V 256K × 16 CMOS SRAM produced by Alliance Semiconductor. It features high speed, low power consumption, and easy expansion.

AS018R1-01, AS018R1-10 is a GaAs IC SPST switch from Alpha Industries with broadband DC-10 GHz, 7 lead hermetic package and meet MIL-STD requirements.

ARF220 is a fast recovery diode produced by ANSALDO company. Its features are short reverse recovery time, low reverse recovery charge, high softness, and it is suitable for power electronic devices and inverters.

AR2500L - AR2510L are automotive rectifier diodes with features including high current capability, high surge current capability, high reliability, low reverse current, and low forward voltage drop.

The document describes the features and characteristics of PhotoMOS RELAYS GU (General Use)-E Type 2-Channel (Form A) Type, including reinforced insulation, compact size, applicable for 2 Form A and two independent 1 Form A use, control of low-level analog signals, high sensitivity, high speed response, low-level off state leakage current, etc.

This document provides technical information for APT10035 MOSFETs, including maximum ratings, static electrical characteristics, characteristic test conditions, etc.

APA2120/1 is a stereo 2W audio power amplifier with features including low operating current, high PSRR, 32 steps volume adjustable, short circuit protection, etc.

The APA2020 is a power amplifier chip from Taiwan semiconductor supplier ON Semiconductor. It is suitable for consumer electronic products such as notebooks, tablets, and smartphones. The chip is powered by a 1.8V supply voltage and provides 1.8W output power at a 4 ohm load and 1.2W output power at an 8 ohm load. The chip integrates depop circuitry and thermal shutdown protection circuitry to reduce pops and clicks noise during power up and when using the shutdown or mute modes and to protect the chip from being destroyed by over-temperature failure. The chip also supports stereo bridge-tied loads (BTL) mode and stereo single-end (SE) mode, both of which can be easily switched by the SE/BTL input control pin signal.

The AP431/AP431A are 3-terminal adjustable precision shunt regulators with guaranteed temperature stability and an extended commercial temperature range. The output voltage can be set to any level greater than 2.495V (VREF) up to 36V merely by selecting two external resistors that act as a voltage divider network. These devices have a typical output impedance of 0.2Ω. Active output circuitry provides very sharp turn-on characteristics, making these devices excellent improved replacements for Zener diodes in many applications. The precise (+/-) 1% Reference voltage tolerance of the AP431/431A make it possible in many applications to avoid the use of a variable resistor, consequently saving cost and eliminating drift and reliability problems associated with variable resistors.

AP1604 is a switching power supply chip from Anachip Corp. It adopts a 600KHz switching frequency, an input voltage range of 2.2V~5.5V, and an output voltage range that can be set by external resistors. The maximum output current can reach 800mA. AP1604 has high efficiency, low standby current, overcurrent protection and overtemperature protection.