Industrial

COP472-3 is a liquid crystal display controller produced by National Semiconductor company, which supports 36 segment displays and can drive 3x12 4-digit digital displays or 3x24 8-digit digital displays

COP404C ROMless CMOS Microcontrollers is a product of National Semiconductor Corporation. It is an accurate emulation of the COP444C, COP424C and COP410C. The product has the lowest power consumption, static, power-saving IDLE state and HALT mode, 4 ms instruction time, 128c4 RAM, 2k c 8 ROM address, true vector interrupt, three-level subroutine stack and single-thread function.

COP424C, COP425C, COP426C, COP324C, COP325C, COP326C and COP444C, COP445C, COP344C, COP345C Single-Chip 1k and 2k CMOS Microcontrollers

COP413C, COP413CH, COP313C, and COP313CH are fully static, single-chip CMOS microcontrollers that belong to the COPS family. They are fabricated using double-poly, silicon-gate CMOS technology and provide complete microcomputer functionality, including system timing, internal logic, ROM, RAM, and I/O. Features include single supply operation, instruction set designed for keyboard input, display output, and BCD data manipulation. These products offer a low-cost solution for various human interface control environments.

The ADC122S101 is a low-power, two-channel CMOS 12-bit analog-to-digital converter with a high-speed serial interface. It is fully specified over a sample rate range of 500 kSPS to 1 MSPS. The converter is based on a successive-approximation register architecture with an internal track-and-hold circuit. It can be configured to accept one or two input signals at inputs IN1 and IN2. The output serial data is straight binary, and is compatible with several standards, such as SPI™, QSPI™, MICROW- IRE, and many common DSP serial interfaces. The ADC122S101 operates with a single supply that can range from +2.7V to +5.25V. Normal power consumption using a +3V or +5V supply is 4.3 mW and 13.1 mW, respec- tively. The power-down feature reduces the power consump- tion to just 0.14 µW using a +3V supply, or 0.32 µW using a +5V supply. The ADC122S101 is packaged in an 8-lead MSOP package. Operation over the industrial temperature range of −40˚C to +85˚C is guaranteed.

This datasheet introduces the features and characteristics of PHILIPS Semiconductors' product BZV37. BZV37 is a low-power bidirectional voltage regulator diode with an operating voltage of 6.5V and a non-repetitive peak reverse power of 40W. This diode can be used for voltage stabilizers and transient protection elements.

ADC0820 is a 8-bit high precision A/D converter with track/hold function produced by Microchip Technology. It uses a half-flash conversion technique and offers a 1.5µs conversion time and dissipates only 75mW of power. The ADC0820 has a built-in track-and-hold function and does not require an external sample-and-hold circuit. It can be used as a memory location or I/O port for easy interface with a microprocessor.

The ADC08200 is a low-power, 8-bit, monolithic analog-to-digital converter with an on-chip track-and-hold circuit. Optimized for low cost, low power, small size and ease of use, this product operates at conversion rates up to 230 MSPS while consuming just 1.05 mW per MHz of clock frequency, or 210 mW at 200 MSPS. Raising the PD pin puts the ADC08200 into a Power Down mode where it consumes 1 mW. The unique architecture achieves 7.3 Effective Bits with 50 MHz input frequency. The ADC08200 is resistant to latch-up and the outputs are short-circuit proof. The top and bottom of the ADC08200’s reference ladder are available for connections, enabling a wide range of input possibilities. The digital outputs are TTL/CMOS compatible with a separate output power supply pin to support interfacing with 3V or 2.5V logic. The digital inputs (CLK and PD) are TTL/CMOS compatible. The ADC08200 is offered in a 24-lead plastic package (TSSOP) and is specified over the industrial temperature range of −40˚C to +85˚C.

BF999 is a N-channel MOSFET, suitable for high frequency applications such as FM applications.

BF998WR is a N-channel dual-gate MOS-FET produced by Philips Semiconductors with high forward transfer admittance, short channel characteristics and high forward transfer admittance to input capacitance ratio, used in VHF and UHF applications, such as television tuners and professional communication equipment.

The BF998/BF998R/BF998RW is a dual-gate N-channel MOS field-effect tetrode, depletion mode. This electrostatic sensitive device. Observe precautions for handling. This product is mainly used in UHF tuner input and mixer stages. Product features include: integrated gate protection diodes, low noise figure, low feedback capacitance, high cross modulation performance, low input capacitance, high AGC range and high gain.

1MSPS, 12-/10-/8-Bit A/D Converters in SOT-23 & LLP