Industrial

Introducing the features of Agilent PrepHT HPLC columns, including particle size, length, column diameter, etc., as well as the advantages of the column in separation and purification.

The 6890/5973N systems can be configured with additional accessories to adapt them for various applications. The MS Productivity ChemStation Data System can process data from both the MS and conventional GC detectors. Table 2 is a partial list of options that may be added to enhance the sample introduction, separation, and detection capabilities. Some of the accessories are provided by third-party channel partners who have been qualified by Agilent Technologies. Check with your local sales representative to discuss your exact needs and the availability of the accessories in your area.

Flow Tracker 2000 is the most complete GC tool on the market today for routine operation, system optimization, and troubleshooting. It can simultaneously measure volumetric flow, mass flow, pressure and temperature, and costs less and works great. It also detects leaks.

The Flow Tracker 2000 is a revolutionary gas chromatography tool that simultaneously measures volumetric flow, mass flow, pressure, and temperature. It also detects leaks, at a lower cost compared to typical leak detectors, while delivering excellent performance.

The COP8780C, COP8781C, and COP8782C are members of the COPS 8-bit microcontroller family. They are fabricated using double-metal, double poly silicon gate microCMOS EPROM technology. These low-cost microcontrollers are complete microcomputers containing all system timing, interrupt logic, EPROM, RAM, and I/O necessary to implement dedicated control functions in a variety of applications. Features include an 8-bit memory mapped architecture, MICROWIRE PLUS serial I/O, a 16-bit timer/counter with associated 16-bit autoreload/capture register, and a multi-sourced interrupt. Each I/O pin has software selectable options to adapt the device to the specific application. These devices operate over a voltage range of 4.5V to 6.0V and have an efficient, regular instruction set operating at a 1 ms instruction cycle rate for optimal throughput. The COP8780C, COP8781C, and COP8782C can be configured to emulate the COP880C, COP840C, and COP820C microcontrollers.

COP820CJ/COP840CJ Family 8-Bit CMOS ROM Based Microcontrollers with 1k or 2k Memory, Comparator and Brown Out Detector

The COP820CJ/840CJ Family ROM based microcontrollers are integrated COP8™ Base core devices with 1k or 2k memory, an Analog comparator and Brownout detection. These single-chip CMOS devices are suited for lower- functionality applications where power and voltage fluctuations are a consideration. The family features include an 8-bit memory mapped architecture, 10MHz CKI with 1us instruction cycle, one multi-function 16-bit timer/counter, MICROWIRE/PLUS™ serial I/O, one analog comparator, power saving HALT mode, MIWU, on-chip R/C oscillator capacitor (COP840CJ), high current outputs, software selectable I/O options, WATCH- DOG™ timer, modulator/timer, Brownout detector, Power on Reset, 2.5v-6.0v operation, and 16/20/28 pin packages.

COP888GD is a ROM-based microcontroller with 16k memory and 8-channel A/D converter, which is a highly integrated, feature-rich microcontroller. It is suitable for applications requiring a full-featured controller with an 8-bit A/D converter, and as a pre-production device for a masked ROM design.

COP888EB is a ROM-based microcontroller with 8k memory and advanced features including a CAN 2.0B (passive) interface, A/D, and USART. It is suitable for applications requiring a full-featured controller with a CAN interface, low EMI, and versatile communications interfaces.

COP888FH is an 8-bit CMOS ROM based microcontroller with 12k memory, comparators, USART and hardware multiply/divide. These single-chip CMOS devices are suited for more complex applications requiring a full featured controller, low EMI, two comparators, a full-duplex USART, and hardware multiply/divide functions.

COP888EK 8-Bit CMOS ROM Based Microcontrollers with 8k Memory, Comparator, and Single-slope A/D Capability

COP888xG/CS Family 8-Bit CMOS ROM Based Microcontrollers with 4k to 24k Memory, Comparators and USART

COP884BC/COP885BC 8-Bit CMOS ROM Based Microcontrollers with 2k Memory, Comparators, and CAN Interface

The COP680C, COP681C, COP682C, COP880C, COP881C, COP882C, COP980C, COP981C, and COP982C are members of the COPSTM microcontroller family. They are fully static parts fabricated using double-metal silicon gate microCMOS technology. This low-cost microcontroller is a complete microcomputer containing all system timing, interrupt logic, ROM, RAM, and I/O necessary to implement dedicated control functions in a variety of applications. Features include an 8-bit memory mapped architecture, MICROWIRE PLUSTM serial I/O, a 16-bit timer/counter with capture register, and a multi-sourced interrupt. Each I/O pin has software selectable options to adapt the device to the specific application. The part operates over a voltage range of 2.5 to 6.0V, and high throughput is achieved with an efficient, regular instruction set operating at a 1 microsecond per instruction rate.