Industrial

DS42585 is a stacked multi-chip package (MCP) flash memory and SRAM product developed by AMD, consisting of Am29DL324D bottom boot 32-megabit (4M x 8-bit/2M x 16-bit) CMOS 3.0 volt-only, simultaneous operation flash memory and 8-megabit (1M x 8-bit/512K x 16-bit) static RAM.

This document introduces the features and characteristics of AMD DS42553 Stacked Multi-Chip Package (MCP) Flash Memory and SRAM.

This document describes the features and characteristics of AMD DS42516 Stacked Multi-Chip Package (MCP) Flash Memory and SRAM, including: the product's power supply voltage is 2.7 to 3.3 volts, the highest performance is 90 nanoseconds, the package is 73-Ball FBGA, and the operating temperature is –25°C to +85°C.

DS42515 is a storage device that is under development by AMD. The product is powered by 3.0V and has a maximum access time of 85ns. The operating temperature range is -25°C to +85°C. The product features simultaneous read/write, zero latency, secure storage, and zero power operation.

This document contains information on a product under development at Advanced Micro Devices. The product is a Stacked Multi-Chip Package (MCP) Flash Memory and SRAM. It features a 16 Megabit flash memory and a 4 Mbit static RAM. The MCP has a power supply voltage of 2.7 to 3.3 volts and a maximum access time of 85 ns. It is packaged in a 69-Ball FBGA and operates at temperatures ranging from -25°C to +85°C. The flash memory has simultaneous read/write operations, a secured silicon sector, and zero power operation.

The DS4125/DS4155/DS4156/DS4160/DS4311/DS4312/DS4622/DS4776 DS4-XO Series Crystal Oscillators are ceramic surface-mount crystal oscillators that are part of Maxim's DS4-XO series crystal oscillators family. These devices offer output frequencies at 125MHz, 155.52MHz, 156.25MHz, 160MHz, 311.04MHz, 312.5MHz, 622.08MHz, and 77.76MHz. The clock oscillators are suited for systems with tight tolerances because of the jitter, phase noise, and stability performance. The small package provides a format made for applications where PCB space is critical.

The DS40MB200 is a dual signal conditioning 2:1 multiplexer and 1:2 fan-out buffer designed for use in backplane redundancy applications. Signal conditioning features include input equalization and programmable output pre-emphasis that enable data communication in FR4 backplanes up to 4 Gb/s. Each input stage has a fixed equalizer to reduce ISI distortion from board traces. All output drivers have 4 selectable steps of pre-emphasis to compensate for transmission losses from long FR4 backplanes and reduce deterministic jitter. The pre-emphasis levels can be independently controlled for the line-side and switch-side drivers. The internal loopback paths from switch-side input to switch-side output enable at-speed system testing. All receiver inputs and driver outputs are internally terminated with 100Ω differential terminating resistors.

The DS4077 is an integrated voltage-controlled crystal oscillator (VCXO) module designed to provide reference clock generation in base stations, telecom/datacom, and wireless applications.

The DS4077 is an integrated voltage-controlled crystal oscillator (VCXO) module designed to provide reference clock generation in base stations, telecom/datacom, and wireless applications.

DS402ST is a double-sided cooled, high surge capability rectifier diode. It has a maximum reverse working voltage of 1400V, a maximum average forward current of 505A and a maximum surge forward current of 5600A.

The DW9268 is an IF filter with a centre frequency of 240.192MHz, designed specifically for the Digital Cordless Personal Communications market. It uses GPS's low loss (7dB typical), Transversal filter technology based on a Quartz substrate for excellent temperature stability. A 3dB passband of 1.3MHz (typical) is maintained whilst providing rejection to adjacent and alternate interferers compliant to the DECT Common Interface specification Part 2 - The Physical Layer. The device also exhibits excellent close-in and ultimate rejection, which combined with a Group Delay Ripple of 200ns maximum makes the DW9268 an ideal IF filter for Digital Cordless Personal Communications systems. The device is packaged in a surface mount, leadless ceramic chip carrier, suited to high volume automated assembly systems.

The DS4000 is a Maxim digitally controlled temperature-compensated crystal oscillator (DC-TCXO) that features a digital temperature sensor, one fixed-frequency temperature-compensated square-wave output (F1), one programmable temperature-compensated square-wave output (F2), and digital communication for frequency tuning (SDA, SCL).

The RP150K Series are CMOS-based dual voltage regulator ICs with high output voltage accuracy, low supply current, low dropout, and high ripple rejection. The output voltage of these ICs is internally fixed with high accuracy (1%). The input voltage range is 2.5V to 5.25V.

The RP150K series are CMOS-based dual output LDO regulators featuring 300mA output. RP150K features supply current as low as 24μA per output, which is substantially lower compared to existing lines. Due to a built-in 0.7Ω (at VOUT=2.8V) on-resistor, RP150K can provide a low dropout voltage. RP150K also features an excellent line transient response, ripple rejection at 80dB, and low noise. The output voltage accuracy is as high as ± 1% and the temperature drift coefficient of output voltage is low at ± 30ppm/°C. RP150K is available in RoHS compliant DFN(PLP)2020-8 package.