Industrial

R1203x series step-up DC/DC converter is dedicated for driving white LEDs with constant current. It is characterized by low supply current, high efficiency, high reliability and good EMI performance.

The R1203x Series are CMOS-based PWM step-up DC/DC converters, which are optimized to drive white LEDs with constant current

The R1218x Series are PWM control type step-up DC/DC converter ICs with low supply current.

The R1218x Series are CMOS-based PWM step-up DC/DC converters, which are optimized to drive white LEDs with constant current. R1218x includes an under-voltage lockout circuit (UVLO), over-voltage protection circuit (OVP). By simply using an inductor, (a diode), a resistor, and a capacitor as external components, white LEDs can be driven with constant current efficiently. R1218xxx1A for 2 to 4 lights contains an internal diode while R1218xxx2A for 5 to 7 lights requires an external diode. The LED current can be determined by the value of current setting resistor. The brightness of the LEDs can be adjusted by applying a PWM signal to the CE or VFB pin.

The R1205x Series are CMOS-based PWM control type step-up DC/DC converter ICs with low supply current. Each of these ICs consists of an NMOS FET, a diode, an oscillator, a PWM comparator, a voltage reference unit, an error amplifier, a current limit circuit, an under voltage lockout circuit (UVLO), an over-voltage protection circuit (OVP), a soft-start circuit, a Maxduty limit circuit, and a thermal shutdown protection circuit. This step-up DC/DC converter can be easily built with a few external components such as a coil, a resistor, and a capacitor. As the protection functions, the R1205x Series have a Lx peak current limit function, an over voltage protection (OVP) function, an under voltage lock out (UVLO) function and a thermal shutdown function. The R1205x Series present the R1205x8xxA version that is optimized for the constant voltage power source, and the R1205x8xxB version that is optimized for driving the white LED with the constant current. The R1205x8xxB is an adjustable version that can change the LED brightness dynamically by using a 200Hz to 300kHz PWM signal toward the CE pin. The R1205x Series are available in DFN1616-6B and TSOT-23-6 packages.

The R1205x series PWM step-up DC/DC converters are optimized for driving white LEDs with constant current and for general use.

The R1204x Series is a low-supply-current CMOS-based PWM step-up DC/DC converter. Internally, a single IC consists of an NMOS FET, an oscillator, a PWM comparator, a voltage reference unit, an error amplifier, a current limit circuit, an under voltage lockout circuit (UVLO), an over-voltage protection circuit (OVP), a soft-start circuit, a maximum duty cycle limit circuit, and a thermal shutdown protection circuit. By simply using an inductor, a resistor, capacitors and a diode as external components, a high-efficiency step-up DC/DC converter can be easily configured. As protection functions, the IC contains a thermal shutdown protection circuit, a current limit circuit, an OVP circuit, and an UVLO circuit. A thermal shutdown circuit detects overheating of the ICs and stops the operation to protect it from damage. A current limit circuit limits the peak current of Lx, and an OVP circuit detects the over voltage of output, and an UVLO circuit detects the low input voltage. The R1204x Series provide the R1204xxxA/D versions, which are optimized for serial driving of white LEDs with constant current, and the R1204xxxB/C/E/F versions, which are optimized for constant voltage driving. Among the R1204xxxB/C/E/F versions, only the R1204xxxC/F versions are equipped with PWM/VFM auto switching controls. The LED current can be determined by the value of current setting resistor. The brightness of the LED can be adjusted by changing the value of the current setting resistor.

R1204x Series PWM/VFM step-up DC/DC converters are optimized to drive white LEDs and OLED with constant current

The R1202x Series are CMOS-based PWM step-up DC/DC converters, which are optimized to drive white LEDs and OLED with constant current. There are two types. The A/B versions are optimized for the general use or the drive of PMOLED, and the D version is optimized for the serial drive of white LED with constant current. The R1202x includes an under-voltage lockout circuit (UVLO), a soft-start circuit, and an over-voltage protection circuit (OVP), a thermal shutdown circuit. By simply using an inductor, divider resisters, and capacitors as external components, OLED and white LEDs can be driven with high efficiently. At the standby mode, the internal NPN transistor can separate the output from the input. (Shutdown function) The A/B version with auto-discharge function is selectable. D Version can set white LED current with feedback resister (R1). The brightness of the LEDs and the soft-start time can be adjusted by applying a PWM signal (200Hz to 300kHz) to the CE pin. In addition to DFN1616-6B, 0.95mm thickness TSOT-23-6 is available.

R1200x series are CMOS-based control type step-up DC/DC converter with low supply current ICs

The R1200x Series PWM Step-up DC/DC converters are CMOS-based PWM step-up DC/DC converters, which are optimized to drive passive matrix OLED or white LEDs with constant current. The R1200x includes an under-voltage lockout circuit (UVLO), a soft-start circuit, and an over-voltage protection circuit (OVP). By simply using an inductor, divider resisters, and capacitors as external components, OLEDs and white LEDs can be driven with high efficiently. At the standby mode, the internal NPN transistor can separate the output from the input. By this shutdown function, white LED's current can be completely shutdown, and output voltage for OLED can be completely cut off, therefore, the R1200x does not have bad impact on the life expectancy of OLED. The version with auto-discharge function is available.

R5533V is a standard type PCMCIA power controller, which has low ON resistance Nch MOSFET switch, built-in over current limit protection function, built-in thermal shutdown protection, open drain flag pin, break-before-make switching and SSOP-16 pin package, which can be applied to PC card power switch, card slot power control and PC card reader / writer, etc.

The R5540 series are N-channel Load Switch ICs with the low supply current, Typ. 9µA. By using an Nch transistor as a driver transistor, the features of low on resistance and the reverse current protection at off state are realized in these ICs. The gate voltage of the N-channel transistor is supplied from the internal step-up circuit. The R5540 is an ideal switch to supply the power from the secondary power source such as the output of a step-down DC/DC to the load circuit. Since the package for the R5540 is the ultra small-sized DFN(PLP)1010-4F, high density mounting on board is possible.

The R5524N series is CMOS-based high-side MOSFET switch ICs for Universal Serial Bus (USB) applications. Using Nch FET as a switching transistor, low ON resistance (Typ.100mΩ) and reverse current protection is possible. An Over-current limit circuit, a thermal shutdown circuit, and an under voltage lockout circuit (UVLO) are built in as protection circuits. Further, a delay circuit for flag signal after detecting over-current, is embedded to prevent miss-operation of error flag because of inrush current. In order to support easy power-line design, the over-current level is highly accurate. The R5524N series is ideal for applications of protection for USB power supply. Since the package is small SOT-23-5, high density mounting on board is possible.