Industrial

One way to minimize the size and complexity of a battery charger is to use a linear-type charger. The linear charger drops the AC adapter voltage down to the battery voltage. The number of external components is low: linear chargers require input and output bypass capacitors, and sometimes need an external pass transistor, and resistors for setting voltage and current limits. The main pitfall of a linear charger is power dissipation. The charger simply drops the AC adapter voltage down to the battery voltage. In the case of a 0.8 A charger, a 5 V±10% regulated AC adapter voltage, and battery voltage that varies between 4.2 V and 2.5 V, the power dissipation can range from 0.64 W to 2.0 W. This type of charger is simpler than the switch-mode type, mainly because the passive LC filter is not required. It dissipates the most power when the battery voltage is at its minimum, since the difference between the fixed input voltage and the battery voltage is greatest during this condition.

This paper introduces a non-isolated double output dual-buck/boost DC/DC converter topology based on the VIPerX2A family. The proposed topology is a non-isolated transformerless topology using an intermediate tap inductor and transformer. This topology operates in the 88 ~ 265 VAC wide input voltage range and can be used in low power and low cost applications.

This application note introduces the STLD40D, a white LED power supply. It is a switching boost regulator that operates from 3.0 V to 5.5 V and can provide an output voltage as high as 37 V and can drive up to 10 white LEDs in series.

AN2321 is an application note released by ST, introducing a high-performance L6599-based HB-LLC adapter, suitable for laptop computers. This design has very low no-load input consumption(<0.4 W) and very high global efficiency.

This application note is dedicated to the design of a flash LED driver using STCF02, which is a step-up/down current mode converter. Schematic and functional description, recommendations for PCB Layout and external components selection are also evaluated.

AN2300 is an application note published by STMicroelectronics, which introduces a switch power supply design scheme based on the VIPer12A chip. The scheme uses a capacitor to store energy, which can achieve low-cost and high-efficiency switch power supply design.

This application note describes the use of the L5970D/L5973D high intensity LED driver. The driver can operate over a wide range of input voltages to drive a series of LEDs, providing efficient energy source.

The L6920DB is a high efficiency monolithic step-up switching converter IC especially designed for battery powered applications, thanks to its minimum start-up of 0.8 V, and a minimum operating voltage of 0.6 V. It requires only three external components to realize the conversion from battery voltage to the selected output voltage. It has a minimum output voltage of 1.8 V, which is enough to supply even the most advanced ASICs and microprocessors. The high switching frequency allows users to choose small inductors and output capacitors for their designs. Supervisory functions include Reference Voltage, Low Battery Detection, and Shutdown, which are provided with overcurrent protection.

This Application Note describes how to connect the STM809, STM810, STM811 and STM812 Reset Circuits to Microprocessor Systems.

This application note describes the problems with monitoring the power supply during power-up/reset in a microprocessor system. It also explains how the ST family of Reset Circuits can be used to solve them.

This application note deals with the design of a 3-Phase auxiliary power supply for 150W dual output SMPS, using the L5991 PWM driver and the STC08DE150 ESBT as main switch.

AN2129 is an application note about L6902D based DC/DC converter, which introduces the dimming method for LED light.

This document describes the design of a dimmable white LED power supply using VIPer53. VIPer53 is the first multichip device of the VIPer family, with very low Rdson, capable of delivering a power of 35W in a standard DIP-8 package without a heatsink. The power supply features a wide output voltage range and dimming capability.