Industrial

The SM10LZ47 is a bidirectional triode thyristor produced by TOSHIBA. Its rated reverse off-state voltage is 800V, its rated on-state current is 10A, and its rated gate voltage is 10V.

223 JST 9 is a miniature surface mount connector produced by JST Company. It has a pitch of 1.0mm and a height of 3.0mm and is designed for vacuum pick and place robotics. This connector has the features of two tin-plated slots (twin U-slots), which ensures reliable connection. In addition, it also has a 3-point insulation grip structure, which ensures a firm grip on terminated wires and protects the insulation displacement connection from possible damage.

This document is an introduction to the SM10996-14 product, which mainly includes information about the product model, size and packaging.

The document introduces the features and characteristics of the SM101 THRU SM107 series of diodes. The document covers the package, terminal, polarity, mounting position, weight, maximum ratings and electrical characteristics of the diodes.

SM101 THRU SM107 are high temperature glass passivated Schottky diodes, packaged in JEDEC MELF(DO-41) plastic body, and are suitable for surface mount applications. Its maximum rated voltage is 1000V, the maximum recurrent peak reverse voltage is 50V, the maximum average forward rectified current is 1A, the maximum instantaneous forward voltage is 100V, the maximum direct current reverse current is 200mA, the maximum direct current reverse blocking voltage is 100V, the typical thermal resistance is 140℃/W, the maximum reverse recovery time is 20us, and the operating temperature range is -55℃ to +175℃.

This document introduces the features and characteristics of the SMD power inductor UC series. The UC series is available in seven package sizes, each with its own benefits. The range features some of the smallest footprint sizes available for this type of product. The UC1606 package is only 1.80mm high and offers safe current operation up to 2.5A (@ 1.0uH). The UC5022 is available up to 1.0mH @ 1 Amp while maintaining a total height less than 8.0mm. Ferrite shielded versions of UC1608, UC3316, and UC5022 are also available.

The UC series is a range of surface mount inductors from ECM Electronics. It is available in seven package sizes with different features. The UC1606 package is only 1.80mm high while offering safe current operation up to 2.5A (@ 1.0uH). The UC5022 is available up to 1.0mH @ 1 Amp while maintaining a total height less than 8.0mm. Ferrite shielded versions of UC1608, UC3316, and UC5022 are also available.

The UC3178 full-bridge power amplifier is designed for demanding servo applications. It features precision current control, programmable over-current control, range control, and compensation adjust. The device operates in both 5V and 12V systems and has low saturation voltage and current protection.

The UC3176/7 family of full bridge power amplifiers is rated for a continuous output current of 2A. Intended for use in demanding servo applications such as disk head positioning, the onboard current sense amplifier can be used to obtain precision control of load current, or where voltage mode drive is required, a standard voltage feedback scheme can be used. Output stage protection includes foldback current limiting and thermal shutdown, resulting in a very rugged device. Auxiliary functions on this device include a dual input under-voltage comparator that can be programmed to respond to low voltage conditions on two independent supplies. In response to an under-voltage condition the power Op-Amps are inhibited and a high current, 100mA, open collector drive output is activated. The devices are operational over a 3V to 35V supply range. Internal under-voltage lockout provides predictable power-up and power-down characteristics.

The UC3176/7 family of full bridge power amplifiers is rated for a continuous output current of 2A. Intended for use in demanding servo applications such as disk head positioning, the onboard current sense amplifier can be used to obtain precision control of load current, or where voltage mode drive is required, a standard voltage feedback scheme can be used. Output stage protection includes foldback current limiting and thermal shutdown, resulting in a very rugged device.

This document introduces the TL494AN/C/D/E functions and features, including precision current control, ±800mA load current, 1.25V total VSAT at 800mA, controlled velocity head parking, precision dual supply monitor with indicator, limit input to force output extremes, inhibit input and UVLO, 4V to 15V operation.

This document describes a full-bridge power amplifier with features such as precision current control, ±800mA load current, 1.25V total VSAT at 800mA, controlled velocity head parking, etc. It is intended for demanding servo applications such as head positioning for high-density disk drives.

The UC3173A full bridge power amplifier, rated for continuous output current of 0.55A, is intended for use in demanding servo applications such as head positioning for high density disk drives. This device includes a precision current sense amplifier that senses load current with a single resistor in series with the load. The UC3173A is optimized to consume a minimum of supply current, and is designed to operate in both 5V and 12V systems. The power output stages have a low saturation voltage and are protected with current limiting and thermal shutdown. When inhibited the device will draw less than 1.5mA of total supply current. Auxiliary functions on this device include a dual input undervoltage comparator, which can monitor two independent supply voltages and activate the built in head park function when either is below minimum. The park circuitry allows a programmable retract voltage to be applied to the load for limiting maximum head velocity. A separate low side parking drive pin permits a series impedance to be inserted to control maximum head velocity.

The UC3173A full bridge power amplifier, rated for continuous output current of 0.55A, is intended for use in demanding servo applications such as head positioning for high density disk drives. This device includes a precision current sense amplifier that senses load current with a single resistor in series with the load. The UC3173A is optimized to consume a minimum of supply current, and is designed to operate in both 5V and 12V systems. The power output stages have a low saturation voltage and are protected with current limiting and thermal shutdown. When inhibited the device will draw less than 1.5mA of total supply current. Auxiliary functions on this device include a dual input undervoltage comparator, which can monitor two independent supply voltages and activate the built in head park function when either is below minimum. The park circuit allows a programmable retract voltage to be applied to the load for limiting maximum head velocity. A separate low side parking drive pin permits a series impedance to be inserted to control maximum head velocity.