Industrial

The UC382 is a fast-response low dropout linear regulator that provides a quick response to fast load changes. Combined with its precision on-board reference, the UC382 excels at driving GTL and BTL buses. Due to its fast response to load transients, the total capacitance required to decouple the regulator’s output can be significantly decreased when compared to standard LDO linear regulators. Dropout voltage (VIN to VOUT) is only 450mV maximum at 100°C and 350mV typical at 3A load. The on-board bandgap reference is stable with temperature and scaled for a 1.200V input to the internal power amplifier. The UC382 is available in fixed output voltages of 1.5V, 2.1V, or 2.5V. The output voltage of the adjustable version can be set with two external resistors. If the external resistors are omitted, the output voltage defaults to 1.2V.

This datasheet is for the SSM02N60P, and it describes the product's features, such as maximum voltage, maximum current, maximum power dissipation, and maximum temperature.

SSM01N60H is a N-channel enhancement-mode power MOSFET produced by SiliconStandard. Its features are dynamic dv/dt rating up to 600V, repetitive avalanche rating up to 13A, Rdson only 8Ω, fast switching speed, and simple driving requirements.

The ADS1232 and ADS1234 are precision analog-to-digital converters with true 23.5-bit performance and exceptional ease of use. Selectable gains of 1, 2, 64, or 128 allow full-scale differential input ranges of ±2.5V to ±19.5mV. The ADS1232 offers a two-channel differential input and a built-in temperature sensor, while the ADS1234 features a four-channel differential input multiplexer. An on-board low-noise gain amplifier with low differential input current minimizes errors when using high-impedance transducers. The devices also feature a low current driver to accommodate different applications.

This data sheet describes the ADS1224's features, including 240SPS data rate, 4MHz clock, 20-bit effective resolution, four differential channels input multiplexer, pin-selectable, high-impedance input buffer, ±5V differential input range, 0.0003% INL (typ), 0.0015% INL (max), self-calibrating, simple 2-wire serial interface, on-chip temperature sensor, single conversions with standby mode, low current consumption: 300µA, analog supply: 2.7V to 5.5V, digital supply: 2.7V to 5.5V.

This datasheet provides detailed information about the ADS1222, including features, applications, and descriptions.

The ADS1218 is an 8-channel 24-bit analog-to-digital converter with 24 bits of no missing code performance and effective resolution of 22 bits. It can be communicated through the SPI interface.

The ADS1217 is an 8-channel, 24-bit Analog-to-Digital Converter (ADC) from Texas Instruments with 24-bit no missing code performance and 22-bit effective resolution.

The ADS1216 is a precision, wide dynamic range, delta-sigma, Analog- to-Digital (A/D) converter with 24-bit resolution operating from 2.7V to 5.25V supplies.

ADS1212 and ADS1213 are precision, wide dynamic range, delta-sigma analog-to-digital converters with 24-bit resolution operating from a single +5V supply. The differential inputs are ideal for direct connection to transducers or low level voltage signals. The delta-sigma architecture is used for wide dynamic range and to guarantee 22 bits of no missing code performance. An effective resolution of 20 bits is achieved through the use of a very low-noise input amplifier at conversion rates up to 10Hz. Effective resolutions of 16 bits can be maintained up to a sample rate of 1kHz through the use of the unique Turbo modulator mode of operation. The dynamic range of the converters is further increased by providing a low-noise programmable gain amplifier with a gain range of 1 to 16 in binary steps. The ADS1212 and ADS1213 are designed for high resolution measurement applications in smart transmitters, industrial process control, weigh scales, chromatography and portable instrumentation. Both converters include a flexible synchronization.

The ADS1210 and ADS1211 are precision, wide dynamic range, delta-sigma analog-to-digital converters with 24-bit resolution operating from a single +5V supply. The differential inputs are ideal for direct connection to transducers or low level voltage signals. The delta-sigma architecture is used for wide dynamic range and to guarantee 22 bits of no missing code performance. An effective resolution of 23 bits is achieved through the use of a very low-noise input amplifier at conversion rates up to 10Hz. Effective resolutions of 20 bits can be maintained up to a sample rate of 1kHz through the use of the unique Turbo modulator mode of operation. The dynamic range of the converters is further increased by providing a low-noise programmable gain amplifier with a gain range of 1 to 16 in binary steps. The ADS1210 and ADS1211 are designed for high resolution measurement applications in smart transmitters, industrial process control, weigh scales, chromatography and portable instrumentation. Both converters include a flexible synchronous serial interface.

ADS1208 is a 2nd-order ∆Σ analog-to-digital converter (ADC) from Texas Instruments. It operates at a clock rate of 10MHz and has a specified input range of ±100mV. It is optimized for current measurement with a Hall sensor, especially in motor control applications.

The document introduces the features and characteristics of ADS1206 and ADS1207 low-cost, high-performance, synchronous voltage-to-frequency converters (VFC), including synchronous operation, external clock setting, maximum input frequency, selectable high-impedance buffered input, 2.5V reference voltage, high-current output driver, 3.3V or 5V power supply, low power consumption, alternate source for AD7740, -40°C to +85°C operating temperature range.