Industrial

The 74VCX162245 is a low voltage CMOS 16 BIT BUS TRANSCEIVER (3-STATE) fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. It is ideal for low power and very high speed 1.8 to 3.6V applications; it can be interfaced to 3.6V signal environment for both inputs and outputs

The 74VCX162244 is a low voltage CMOS 16 BIT BUS BUFFER (NON INVERTED) fabricated with sub-micron silicon gate and five-layer metal wiring C2MOS technology. It is ideal for low power and very high speed 1.8 to 3.6V applications; it can be interfaced to 3.6V signal environment for both inputs and outputs. Any nG output control governs four BUS BUFFERS. Output Enable input (nG) tied together gives full 16-bit operation. When nG is LOW, the outputs are on. When nG is HIGH, the output are in high impedance state. This device is designed to be used with 3 state memory address drivers, etc. The device circuits is including 26Ω series resistance in the outputs. These resistors permits to reduce line noise in high speed applications. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and trans

The 74VCX162244 is a low voltage 16-bit buffer/line driver with 3.6V tolerant inputs and outputs and 26Ω series resistor in outputs. It is designed for low voltage applications with high-speed operation and low power dissipation.

74VCX162244 is a 16-bit buffer with low voltage, high speed, low power, 3.6V input and output

The OP284 is a single supply, 4 MHz bandwidth amplifier produced by Maxwell Technologies. It features radiation hardness, wide bandwidth, low noise, and high output drive capability.

The data sheet is about the 74VCX162240 low voltage 16-bit inverting buffer/line driver, which includes product features, characteristics, brand, model and other information.

This document introduces the 74VCX132, a low voltage quad 2-input NAND gate with Schmitt Trigger Inputs and 3.6V Tolerant Inputs and Outputs. This product is designed for low voltage (1.65V to 3.6V) VCC applications with I/O compatibility up to 3.6V. This product is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.

OP280 is a high power, wide beam angle, 880nm wavelength infrared light emitting diode for machine automation and optical encoder applications.

The TD350E is an advanced IGBT/MOSFET driver with features including 1.5A source/2.3A sink gate drive, active Miller clamp, two-level turn-off with adjustable level and delay, desaturation detection, fault status output, negative gate drive capability, input compatible with pulse transformer or optocoupler, separate sink and source outputs for easy gate driving, UVLO protection, and 2kV ESD protection. It is suitable for use in 1200V, 3-phase inverters, motor control, and UPS systems.

The VNI4140K-32 is a quad high side smart power solid state relay with features such as 1A output current per channel, shorted load protections, overtemperature protection, etc.

L6360 IO-Link communication master transceiver IC Datasheet - production data

The L6385E is an STMicroelectronics high-voltage high and low side driver, featuring high voltage rail up to 600V, dv/dt immunity ±50V/nsec, switching times 50/30 ns rise/fall, 1nF load, CMOS/TTL Schmitt trigger inputs, under voltage lock out and outputs in phase with inputs.