Industrial

M74HC73 is a CMOS DUAL J-K FLIP FLOP WITH CLEAR with high speed, low power consumption, high noise immunity, symmetrical output impedance, balanced propagation delay and wide operating voltage range

The M74HC688 is a 8-bit comparator in the MC74HC series. It has the features of high speed, low power consumption, high noise immunity, symmetrical output impedance, balanced propagation delay and wide operating voltage range.

The M74HC597 is a high-speed CMOS 8-bit PIPO shift register fabricated with silicon gate C2MOS technology. This device consists of an 8-bit storage latch feeding a parallel in, serial out 8-bit shift register. Both the storage register and shift register have positive edge-triggered clocks. The shift register also has direct load (from storage) and clear inputs. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

The M74HC595 is an high speed CMOS 8-BIT SHIFT REGISTERS/OUTPUT LATCHES (3-STATE)

The M74HC592 is a high speed CMOS 8-bit register counter fabricated with silicon gate C2MOS technology. The M74HC592 is a parallel input, 8 bit storage register feeding an 8 bit binary counter. Both the register and the counter have individual positive edge triggered clock. In addition, the counter has direct load and clear functions. Expansion is easily accomplished by connecting RCO at the first stage to the count enable of the second stage. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

M74HC590 is a high speed CMOS 8-BIT BINARY COUNTER REGISTER (3 STATE)

The document describes the M74HC564 high-speed CMOS octal D-type flip-flop with 3-state output inverting. It is fabricated with silicon gate C2MOS technology and features high speed, low power dissipation, high noise immunity, and a wide operating voltage range.

The M74HC563 is an high speed CMOS OCTAL LATCH WITH 3-STATE OUTPUTS fabricated with silicon gate C2MOS technology.

M74HC540 is an advanced high-speed CMOS OCTAL BUS BUFFER (3-STATE) fabricated with silicon C2MOS technology.

The M74HC51 is a high-speed CMOS dual 2-wide 2-input AND/OR invert gate fabricated with silicon gate C2MOS technology. It contains a 2-wide 2-input AND/OR invert gate and a 2-wide 3-input AND/OR invert gate. The internal circuit is composed of 3 stages (2 input) or 5 stages (3 input) including buffer output, which enables high noise immunity and stable output. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

M74HC4543 is a high speed CMOS BCD-TO-7 SEGMENT DECODER WITH LCD DRIVER. It features high speed, low power dissipation, high noise immunity, symmetrical output impedance, balanced propagation delays and wide operating voltage range. The device consists of BCD-TO-7 segment decoder with a BCD input latch and a 7-segment driver for a liquid crystal display (LCD). When any illegal BCD input signal is applied or input BI is held high, the display is blanked. When driving LCDs, a common square wave signal should be applied not only to the PH input of this device but also to the electrically common backplane of the display. For other types of readouts, such as light-emitting diode (LED), some additional drivers, such as a transistor array is required. All inputs are equipped with protection circuits against static discharge and transient excess voltage.

The M74HC4538 is a high speed CMOS monostable multivibrator fabricated with silicon gate C2MOS technology. Each multivibrator features both a negative A, and a positive B, edge triggered input, either of which can be used as an inhibit input. Also included is a clear input that when taken low resets the one shot. The monostable multivibrators are retriggerable. That is, they may be triggered repeatedly while their outputs are generating a pulse and the pulse will be extended. Pulse width stability over a wide range of temperature and supply is achieved using linear CMOS techniques. The output pulse equation is simply: PW = 0.7 (R)(C) where PW is in seconds, R in Omhs and C is in Farads. All the inputs are equipped with protection circuits against static discharge and transient excess voltage.

M74HC4518 is a high-speed CMOS DUAL BINARY COUNTER fabricated with silicon gate C2MOS technology. It consist of two identical internally synchronous 4-stage counters.

M74HC4316 is a CMOS QUAD BILATERAL SWITCH fabricated with silicon gate C2MOS technology. This device has four independent analogue switches. Each switch has two input/output terminals (nI/O, nO/I) and an active high select input (nC).

M74HC4094 is an 8 bit SIPO shift register with 3 state output buffer that can be used as shift register or latch. It features high speed, low power dissipation and high noise immunity.