Industrial

74VHC125 QUAD BUS BUFFERS (3-STATE) is an advanced high-speed CMOS QUAD BUS BUFFERS fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.

This document describes the features and characteristics of the 74V1G86 high-speed CMOS single exclusive OR gate. The gate has features such as high speed, low power dissipation, high noise immunity, power down protection on inputs, balanced propagation delays, etc. It operates in a voltage range of 2V to 5.5V and has improved latch-up immunity. The gate can be used for interfacing between 5V and 3V.

The DMS-30PC Series is a wide line of self-contained, fully operational, 3½ digit voltmeters with large, easy-to-read LED displays.

74V1G32 is a high-performance CMOS SINGLE 2-INPUT OR GATE fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The internal circuit is composed of 2 stages including buffer output, which provide high noise immunity and stable output. This device can be used to interface 5V to 3V.

74V1G14 is a CMOS SINGLE SCHMITT INVERTER with features of high speed, low power dissipation, high noise immunity, stable output, and can be used for 5V to 3V interface.

The document describes a CMOS single bilateral switch that features high speed performance, low power consumption, high noise immunity, and low on-resistance. The switch is suitable for a wide operating range from 2V to 12V.

The document describes the features and characteristics of the 74V1G125 single bus buffer, including high speed performance, low power dissipation, high noise immunity, power down protection on inputs, symmetrical output impedance, etc.

74V1G08 is a high-performance, low-power, high noise immunity, wide voltage range CMOS single 2-input AND gate. The chip adopts advanced C2MOS process, with 2-stage buffer output, high impedance output, strong current output capacity. At the same time, input pull-down resistors are provided, which can work normally under various power supply voltages.

The 74V1G04 is a high-speed, single-supply, single inverter fabricated in C2MOS technology.

This document describes the features and characteristics of the 74V1G02 single 2-input NOR gate, including high speed, low power dissipation, high noise immunity, power down protection on inputs, and balanced propagation delays. The gate is suitable for interfacing 5V to 3V.

The 74V1G00 is a high speed, low power, high noise immunity, dual input Nand gate circuit.

The 74LVX245 is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power, battery operated and low noise 3.3V applications.

The 74LCX16245 is a low voltage CMOS 16 bit bus transceiver (3-state) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs. This IC is intended for two-way asynchronous communication between data buses; the direction of data transmission is determined by DIR input. The two enable inputs nG can be used to disable the device so that the buses are effectively isolated. It has same speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. All floating bus terminals during High Z State must be held HIGH or LOW.

The 74LCX573 is a low voltage CMOS octal D-type latch with 3-state non-inverting output fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs. These 8 bit D-Type latch are controlled by a latch enable input (LE) and an output enable input (OE). While the LE inputs is held at a high level, the Q outputs will follow the data input. When the LE is taken low, the Q outputs will be latched at the logic level of D input data. While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while (OE) is in high level, the outputs will be in a high impedance state. It has same speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge.

The 74LCX574 is a low voltage CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUT NON-INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs.