Industrial Manuals

The AD9283 is an 8-bit monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and is optimized for low cost, low power, small size, and ease of use. The product operates at a 100 MSPS conversion rate, with outstanding dynamic performance over its full operating range. The ADC requires only a single 3.0 V (2.7 V to 3.6 V) power supply and an encode clock for full performance operation. No external reference is needed.

This document provides an overview of the AD6600 mixed-signal receiver chip, including its features and characteristics, applications, etc.

AD7705/AD7706 are 16-bit Σ-Δ ADCs with 3 V/5 V operation and 1 mW power dissipation. They have 2-/3-channel inputs and feature a programmable gain front end, support for multiple serial interfaces, and are suitable for low frequency measurement applications.

The AD7723 is a complete 16-bit, sigma-delta ADC with a 1.2 MSPS output word rate and a 32×/16× oversampling ratio. It features low-pass and band-pass digital filters, linear phase, on-chip 2.5V voltage reference, standby mode, flexible parallel or serial interface, and more.

The AD7856 is a high-speed, low-power, 14-bit ADC that operates from a single 5 V power supply. The ADC powers up with a set of default conditions at which time it can be operated.

The AD7863 is a high speed, low power, dual 14-bit analog-to-digital converter that operates from a single 5 V supply. It has two independent 14-bit ADCs, each with two channels, for simultaneous sampling and conversion of four signals. The AD7863 also features overvoltage protection, a high speed parallel interface, and a low power mode.

The AD9051 is a complete 10-bit monolithic sampling analog- to-digital converter (ADC) with an onboard track-and-hold and reference. The unit is designed for low cost, high performance applications and requires only 5 V and an encode clock to achieve 60 MSPS sample rates with 10-bit resolution. The encode clock is TTL compatible and the digital outputs are CMOS; both can operate with 5 V/3 V logic.

The AD9224 is a monolithic, single supply, 12-bit, 40 MSPS, analog-to-digital converter with an on-chip, high performance sample-and-hold amplifier and voltage reference. The AD9224 uses a multistage differential CML voltage reference and ADC, and integrates high performance analog input, digital logic, and reference voltage source.

The AD9225 is a monolithic, single-supply, 12-bit, 25 MS/s analog-to-digital converter with an on-chip, high performance sample-and-hold amplifier and voltage reference.

The AD6640 is a high performance 12-bit analog-to-digital converter (ADC) that provides CMOS compatible digital outputs at 65 MSPS. The AD6640 operates on a single 5V supply and has an 80 dB spurious-free dynamic range (SFDR) over a bandwidth of 25 MHz. It is designed for use in multichannel, multimode receivers.

AD7339 is a 5V integrated high speed ADC/Quad DAC system from Analog Devices, which includes an 8-bit parallel A-to-D converter, two 8-bit parallel DACs and two 8-bit serial DACs. It also supports single 5V power supply, on-chip reference voltage and low power mode. It is packaged in 52-lead PQFP.

The AD7927 is a 12-bit, high speed, low power, 8-channel, successive approximation ADC with a sequencer. It features fast throughput rate, low power consumption, wide input bandwidth, and flexible power/serial clock speed management.

The AD9238 is a dual, 3 V, 12-bit, 20 MSPS/40 MSPS/65 MSPS analog-to-digital converter (ADC). It features dual high performance sample-and-hold amplifiers (SH...)

The AD9244 is a 14-bit, 40 MSPS/65 MSPS A/D converter with features such as low power consumption, on-chip reference voltage, and sample-and-hold circuit. It has a 750 MHz analog input bandwidth, SNR greater than 73 dBc to Nyquist @ 65 MSPS, and SFDR greater than 86 dBc to Nyquist @ 65 MSPS.

AD7485 is a 14-bit high speed low power SAR ADC with a maximum throughput of 1MSPS. It supports single-ended and differential input, has an internal 2.5V reference voltage, a low noise wideband follower and hold, and uses a proprietary algorithmic successive approximation technique. The conversion time is 2.6us and the power consumption is 80mW (normal working mode) and 3mW (NAP mode).