Industrial Manuals

The AD7865 is a fast, low power, four-channel simultaneous sampling 14-bit A/D converter that operates from a single 5V supply. The part contains a 2.4µs successive approximation ADC, four track/hold amplifiers, 2.5V reference, on-chip clock oscillator, sign...

The AD9432 is a 12-bit monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and is optimized for high-speed conversion and ease of use. The product operates at a 105 MSPS conversion rate with outstanding dynamic performance over its entire dynamic range.

The AD7888 is a high-speed, low-power 12-bit ADC that operates from a single 2.7V to 5.25V power supply. It has a throughput rate of 125 kSPS and features eight single-ended analog inputs.

The AD7827 is a high speed, single channel, low power, analog-to-digital converter with a maximum throughput of 1 MSPS that operates from a single 3V or 5V supply. The AD7827 contains a track/hold amplifier, an on-chip 2.5V reference (2% tolerance), a 420 ns 8-bit half-flash ADC, and a serial interface. The serial interface is compatible with the serial interfaces of most DSPs (Digital Signal Processors). The throughput rate of the AD7827 is dependent on the c

AD7864 is a high-speed, high-precision, 4-channel, simultaneous sampling, 12-bit ADC

The AD9201 is a complete dual channel, 20 MSPS, 10-bit CMOS ADC. It is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications). The 20 MHz sampling rate and wide input bandwidth will cover both na

The AD9260 is a 16-bit high-speed oversampled analog-to-digital converter (ADC) with a 16-bit resolution at a 2.5 MHz output word rate. It features an 8× oversampling mode, a 20 MSPS clock, a 1.01 MHz signal passband with 0.004 dB ripple, an 88.5 dB signal-to-noise ratio, -96 dB total harmonic distortion, 100 dB spurious-free dynamic range, 0.6 LSB input referred noise, and other characteristics.

The AD9281 is a dual channel, 28 MSPS, 8-bit CMOS ADC from Analog Devices. It features low power dissipation, single supply, differential nonlinearity error of 0.1 LSB, and on-chip reference signal-to-noise ratio of 49.2 dB.

This document describes the features and characteristics of the AD7720 CMOS Sigma-Delta Modulator, including 12.5 MHz master clock frequency, 0 V to +2.5 V or ±1.25 V input range, single bit output stream, 90 dB dynamic range, etc.

AD7731 is a low noise, high throughput 24-bit Sigma-Delta ADC.

The AD7811/AD7812 are high performance, low power, 10-bit A/D converters with a maximum sampling rate of 350 kSPS and a power supply range of 2.7V to 5.5V. The devices feature 10-bit resolution, 2.3us conversion time, and can be configured as four single-ended inputs, three pseudo-differential inputs, or two independent pseudo-differential channels. Additionally, the AD7811/AD7812 include on-board track and hold circuitry, a 2.5V±2.5% reference voltage, and support a DSP/microcontroller-compatible serial interface.

The AD7822/AD7825/AD7829 are high speed, 1-, 4-, and 8-channel, microprocessor-compatible, 8-bit analog-to-digital converters.

AD9054A is a high-performance analog-to-digital converter (ADC) from Analog Devices that offers a conversion rate of up to 200MSPS. It also has low power consumption, small size, and is easy to use. This product is ideal for applications that require high dynamic performance, such as RGB graphics processing, high-resolution video, digital data storage, read channels, digital communications, digital instrumentation, and medical imaging.

The AD7730/AD7730L Bridge Transducer ADC is a complete analog front end for weigh-scale and pressure measurement applications. The device accepts low-level signals directly from a transducer and outputs a serial digital word. The input signal is applied to a proprietary pro-grammable gain front end based around an analog modulator.

This document describes the features and characteristics of the AD7813 8-/10-bit sampling ADC from Analog Devices, including operating voltage range, conversion time, interface type, power consumption, etc.