Industrial Manuals

The AD7819 is a high-speed, microprocessor-compatible, 8-bit analog-to-digital converter with a maximum throughput of 200 kSPS. The converter operates off a single 2.7 V to 5.5 V supply and contains a 4.5 µs successive approximation A/D converter, track/hold circuitry, on-chip clock oscillator and 8-bit wide parallel interface. The parallel interface is designed to allow AD7819 to be directly connected to an 8-bit microprocessor.

The AD9280 is a monolithic, single supply, 8-bit, 32 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9280 uses a multistage differential pipeline architecture at 32 MSPS data rates and guarantees...

The AD977/AD977A is a high-speed, low-power 16-bit A/D converter that operates from a single 5 V supply. The AD977A has a throughput rate of 200 kSPS whereas the AD977 has a throughput rate of 100 kSPS.

The AD7810 is a high-speed, low-power, 10-bit ADC in an 8-lead microSOIC/DIP package. It operates from a supply voltage range of 2.7 V to 5.5 V and has a conversion time of 2.3 µs.

The AD7823 is an 8-bit ADC with a conversion time of 4μs, operating voltage range of 2.7V to 5.5V. It is available in an 8-lead microSOIC/DIP package and is suitable for low power, handheld portable applications requiring 8-bit accuracy analog-to-digital conversion.

AD9200 is a monolithic, single supply, 10-bit, 20 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference.

The AD9240 is a single-chip 14-bit, 10 MSPS analog-to-digital converter with features such as low power consumption and single supply.

AD9241 is a 14-bit, 1.25 MSPS monolithic A/D converter with low power consumption, single +5V supply, less than 2.5 LSB integral nonlinearity error and less than 0.6 LSB differential nonlinearity error.

The AD976/AD976A is a high-speed, low-power 16-bit ADC that operates from a single 5 V supply. It contains a successive approximation, switched capacitor ADC, an internal 2.5 V reference and a high speed parallel interface. The ADC is factory calibrated to minimize all linearity errors. The analog full-scale input is the standard Vin=5V. The AD976/AD976A has a conversion time tCONV≈20μs, which corresponds to a sample rate of 100 kSPS. The AD976A has a conversion time tCONV≈10μs, which corresponds to a sample rate of 200 kSPS.

AD7854/AD7854L is a 3V to 5V single supply, 200 kSPS 12-bit sampling ADC. It features low power consumption, flexible parallel interface, automatic power management, and is suitable for battery-powered systems, instrumentation and control systems, etc.

The AD9288 is a dual 8-bit, 40/80/100 MSPS ADC with low power, high accuracy, and scalability, and is suitable for battery-powered instruments, hand-held scopemeters, low cost digital oscilloscopes, and I and Q communications applications.

This document describes the Analog Devices AD7729, a dual Sigma-Delta ADC with an auxiliary DAC. The AD7729 is a low power, two-channel, input port with signal conditioning features. It features 15-bit Sigma-Delta A/D converters, 64 dB SNR output, programmable filters, and built-in calibration.

The AD7887 is a high speed, low power, 12-bit analog-to-digital converter (ADC) that operates from a single 2.7 V to 5.25 V power supply. It offers flexible power/throughput rate management and a shutdown mode with a current consumption of only 1 μA.

AD7894 is a fast, 14-bit, 5 V supply, 5 µs conversion time analog-to-digital converter (ADC) from AD, housed in a small 8-lead SOIC. The part contains a 5 µs successive approximation A/D converter, an on-chip track/hold amplifier, an on-chip clock and a high speed serial interface. Output data from the AD7894 is provided via a high speed, serial interface port. This two-wire serial interface has a serial clock input, a serial data output and a busy output. The AD7894 is available in three versions with different input ranges. The AD7894-10 accepts input signals ranging from -10 V to +10 V, the AD7894-3 accepts input signals ranging from -2.5 V to +2.5 V and the AD7894-2 accepts input signals ranging from 0 V to +2.5 V.