Atmel manuals, page 10
ATMEL ATV750/ATV750L handbook
The document introduces a new type of programmable logic device with features such as high-density replacement for discrete logic, high-speed, and low power consumption. The device has 42 inputs and 20 sum terms, providing increased logic flexibility. The output logic is flexible, with 20 flip-flops that can be individually buried or directly output. Multiple feedback paths are available for buried state machines and I/O bus compatibility. The device is reprogrammable and uses a reliable high-speed CMOS EPROM process. It is available in 24-pin and 28-pin packages.
ATMEL ATF20V8B handbook
The ATF20V8B is a high performance CMOS (Electrically Erasable) Programmable Logic Device (PLD) that utilizes Atmel's proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% range for commercial temperature ranges.
ATMEL AT94S Secure Series Programmable SLI handbook
The document describes a multichip module containing a field-programmable system-level integrated circuit (FPSLIC™) and secure configuration EEPROM memory. The product features 512 Kbits to 1 Mbit of configuration memory with security protection and in-system programming (ISP). The FPSLIC is an SRAM-based FPGA with an embedded high-performance RISC AVR® core and extensive data and instruction SRAM. It also includes a patented SRAM-based AT40K FPGA with 5,000 to 40,000 gates and FreeRAM™ feature, making it ideal for dynamically reconfigurable and low-power applications. The product utilizes a patented AVR enhanced RISC architecture with 120+ powerful instructions, most of which can be executed in a single clock cycle. It also includes a high-performance hardware multiplier for DSP-based systems and achieves close to 1 MIPS per MHz performance. The product offers up to 36 Kbytes of dynamically allocated instruction and data SRAM, as well as JTAG interface for extensive on-chip debugging support.
ATMEL AT76C111 handbook
AT76C111 is a low-power digital camera control chip that integrates DSP and video encoder, supports SDRAM and various storage cards, and can be widely used in consumer digital cameras, portable digital camcorders, industrial vision systems, etc.
ATMEL AT6000(LV) Series handbook
This document introduces the features and characteristics of AT6000 series SRAM-based field programmable gate arrays (FPGAs), including high performance, low power consumption, programmable clock options, and independently configurable I/O.
ATMEL AT24C32A (1)/AT24C64A (2) handbook
The document describes the features and characteristics of the AT24C32A/64A products, including low-voltage and standard-voltage operation, low-power devices, internally organized 4096 x 8, 8192 x 8, two-wire serial interface, Schmitt trigger, bidirectional data transfer protocol, etc.
ATMEL AT24C02A/AT24C04A/AT24C08A handbook
ATMEL AT24C01A/AT24C02/AT24C04/AT24C08A/AT24C16A handbook
AT24C01A/02/04/08A/16A series is a 1024/2048/4096/8192/16384 bits serial electrically erasable and programmable read-only memory (EEPROM) organized as 128/256/512/1024/2048 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. AT24C01A/02/04/08A/16A are available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 5-lead SOT23 (AT24C01A/AT24C02/AT24C04), 8- lead TSSOP, and 8-ball dBGA2 packages and is accessed via a Two-wire serial inter- face. In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) two supply voltages.
ATMEL AT49F080 AT49F080T Data Sheet
This document introduces the features and characteristics of AT49F080, including single voltage operation, fast read access time, internal program control and timer, 16K bytes boot block lockout, fast erase cycle time, byte programming, hardware data protection, data polling to detect end of program, low power dissipation and typical 10,000 write cycles.
ATMEL AT45DB021D Manual
This document describes the features of AT45DB021D, AT45DB021D is a 2.7V, serial-interface Flash memory, ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications.
ATMEL Two-wire Serial EEPROM 512K (65 536 x 8) AT24C512 Manual
AT24C512 is a serial electrically erasable and programmable read only memory (EEPROM) with features of low power and low voltage operation. It has an internally organized structure of 65,536 x 8 bits, with a two-wire serial interface, Schmitt triggers, and filtered inputs for noise suppression. The product supports bidirectional data transfer protocol, compatibility with multiple operating voltages (2.7V to 5.5V, 1.8V to 3.6V) and different frequencies (1 MHz, 400 kHz, 100 kHz). It also features a write protect pin, 128-byte page write mode, self-timed write cycle, high reliability (100,000 write cycles, 40 years data retention), etc. It can be used in industrial and commercial applications.
ATMEL AT89C51CC03 handbook
This document describes the features and characteristics of the STC15W408AS series microcontrollers.
ATMEL DVK90CAN1 Hardware User Guide
DVK90CAN1 is a development board that can be used to develop AT90CAN128 microcontroller. This manual describes the features of the development board, its use and how it is used in the system.
ATMEL AT45DB321C Manual
The AT45DB321C is an SPI compatible, serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data- storage applications. The AT45DB321C supports a 4-wire serial interface known as RapidS for applications requiring very high speed operations. Its 34,603,008 bits of memory are organized as 8192 pages of 528 bytes each. In addition to the 33-megabit main memory, the AT45DB321C also contains two SRAM buffers of 528 bytes each. The buffers allow the receiving of data while reprogramming the flash array.
ATMEL T98C51CC01 Data Sheet
This document introduces the features and characteristics of the 4129L-CAN product