Atmel manuals, page 8
ATMEL Bluetooth/ISM 2.4-GHz Front-End IC T7024 Manual
The T7024 is a monolithic SiGe transmit/receive front-end IC with power amplifier, low-noise amplifier and T/R switch driver. It is especially designed for operation in TDMA systems like Bluetooth® and WDCT. Due to the ramp-control feature and a very low quiescent current, an external switch transistor for VS is not required.
ATMEL - Single-Chip Flash Microcontroller with MP3 Decoder Human Interface AT83SND1C AT89C51SND1C AT80C51SND1Chandbook
This document describes a product with a MPEG I/II-Layer 3 hardwired decoder, supporting multiple sampling frequencies and audio control features, as well as external storage interface and communication interface.
ATMEL - ATAVRRTOS contains the complete source code of Micrium uC/OS-II Real Time Operating System. Also inc
This document provides detailed information about ATAVRRTOS, including the version, supported AVR chips, supported AVR Studio versions, supported debuggers, included software, and a detailed description of the product.
ATMEL U2270B Data Sheet
This document introduces the features and characteristics of the U2270B, including carrier frequency, data rate, power supply, application scenarios, etc.
ATMEL - AT89ISP Data Sheet
ATMEL U2008B Data Sheet
The U2008B is a phase-control circuit in bipolar technology, with features including full wave current sensing, compensated mains supply variations, variable soft start or load-current sensing, voltage and current synchronization, switchable automatic retriggering, triggering pulse typically 125 mA, and internal supply-voltage monitoring. It is suitable for low-cost motor control and domestic appliance applications.
ATMEL ATAVRRZ201 USER'S GUIDE
The ATAVRRZ201 kit contains five 2.4 GHz 802.15.4 compliant and ZigBee compatible Radio-Controller Boards equipped with ATmega1281V microcontroller and AT86RF230 transceiver. By offering additional RCB's, the ATAVRRZ201 kit complements the ATAVRRZ200 kit, enabling demonstration of larger wireless networks based on 802.15.4 and ZigBee.
ATMEL AVR Z-Link 2.4 GHz Packet Sniffer Kit
The RZ541 Packet Sniffer Kit is the ideal platform for analyzing 802.15.4(TM) and ZigBee wireless networks. Included is the basic edition of the Sensor Network Analyzer software from Daintree Networks which enables visualisation, measurement, and analysis of large networks. The kit contains. - STK541 USB Adapter board - 2.4 GHz Radio Controller Board - USB Cable - Daintree Networks Sensor Network Analyzer CD
ATMEL AT45DCB008 Data sheet
AT45DCB008, AT45DCB004 and AT45DCB002 are 2.7-volt only SPI compatible serial interface DataFlash® Cards. They are offered in 8-megabyte (64-Mbit), 4-mega- byte (32-Mbit) and 2-megabyte (16-Mbit) densities. These 7-pin cards are form factor compatible to the MultiMediaCard standard leveraging on a wide range of low cost connectors that are commercially available. Additionally, the DataFlash Card is pinout compatible to the SPI version of the MMC card. The small form factor and simple interface make the DataFlash Card ideal for a wide variety of data- and program code-storage applications where a removable storage medium is required. Applications range from voice/audio, text or image storage to soft- ware applications, system upgrades and software patches. For detailed device specifications, please refer to the corresponding DataFlash datasheets: • AT45DCB008 reference AT45DB642 • AT45DCB004 reference AT45DB321B • AT45DCB002 reference AT45DB161B
ATMEL 8-Bit Microcontroller with 12K Bytes Flash AT89LS53 Manual
The AT89LS53 is a low-power, wide-voltage range, high-performance CMOS 8-bit microcomputer with 12K bytes of downloadable Flash programmable and erasable read-only memory. The device is manufactured using Atmel's high-density nonvolatile memory technology and is compatible with the industry standard 80C51 instruction set and pinout. The on-chip downloadable Flash allows the program memory to be reprogrammed in-system through an SPI serial interface or by a conventional nonvolatile memory programmer. By combining a versatile 8-bit CPU with downloadable Flash on a monolithic chip, the Atmel AT89LS53 is a powerful microcomputer which provides a highly flexible and cost-effective solution to many embedded control applications.
ATMEL 1-megabit (64K x 16) 5-volt Only Flash Memory AT49F1024 AT49F1025 Manual
The AT49F1024 and AT49F1025 are 5-volt-only in-system Flash memories. Their 1 megabit of memory is organized as 65,536 words by 16 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the devices offer access times to 35 ns with power dissipation of just 275 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. The only difference between the AT49F1024 and the AT49F1025 is the package. To allow for simple in-system reprogrammability, the AT49F1024/1025 does not require high-input voltages for programming. Five-volt-only commands determine the read/write operations.
ATMEL AT28LV64B handbook
AT28LV64B is a low voltage CMOS E2PROM with page write and software data protection features. It operates at a single 3.3V ± 10% supply and supports 3V read and write operation. It has software-protected programming and low power dissipation. It offers fast access time, automatic page write operation, and high reliability.
ATMEL ATF1516AS/L Data Sheet
ATF1516AS/L is a high density, high performance electrically erasable complex programmable logic device with 256 macrocells, 5 product terms per macrocell, expandable up to 40 per macrocell, 160, 192, 208 pins, 10 ns maximum pin-to-pin delay, registered operation up to 100 MHz, enhanced routing resources
ATMEL AT27BV800 Data Sheet
The AT27BV800 is a high performance low-power, low-voltage 8,388,608-bit one time programmable read only memory (OTP EPROM), organized as either 512K by 16 or 1024K by 8 bits. It requires only one supply in the range of 2.7 to 3.6V in normal read mode.
ATMEL AT27BV4096 Data Sheet
The AT27BV4096 is a high performance, low power, low voltage 4,194,304 bit one-time programmable read only memory (OTP EPROM) organized as 256K by 16 bits. It requires only one supply in the range of 2.7V to 3.6V in normal read mode operation. The by-16 organization makes this part ideal for portable and handheld 16 and 32 bit microprocessor based systems using either regulated or unregulated battery power.