Atmel manuals, page 14
ATMEL Application Note Data Sheet
This document introduces the hardware design of DB101, including circuit schematics, PCB layout, bill of materials, etc.
ATMEL AT90USBKey Manual
This document is the AT90USBKey Hardware User Guide, which describes the features and functions of the AT90USBKey development board.
ATMEL STK525 Hardware User Guide
This document describes the STK525 dedicated to the AT90USBxxx AVR microcontroller
ATMEL AT93C46D Three-wire Serial EEPROM Manual
ATMEL AT91SAM7X-EK Evaluation Board for AT91SAM7X AT91SAM7XC user manual
The AT91SAM7X-EK and AT91SAM7XC-EK evaluation kits enable evaluation capabilities and code development.
ATMEL AT45DB081D handbook
The AT45DB081D is a 2.5V or 2.7V, serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. The AT45DB081D supports RapidS serial interface for applications requiring very high speed operation.
ATMEL AT89S2051/AT89S4051 Preliminary handbook
The AT89S2051/S4051 is a low-voltage, high-performance CMOS 8-bit microcontroller with 2K/4K bytes of In-System Programmable (ISP) Flash program memory. The device is manufactured using Atmel’s high-density nonvolatile memory technology and is compatible with the industry-standard MCS-51 instruction set. By combining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89S2051/S4051 is a powerful microcontroller which provides a highly-flexible and cost-effective solution to embedded control applications.
ATMEL AT45DB011B Manual
The AT45DB011B is a 1MB 2.7 volt only data flash ideally suited for a wide variety of digital voice, image, program code and data storage applications. Its 1,081,344 bits of memory are organized as 512 pages of 264 bytes each. In addition to the main memory, the AT45DB011B also contains one 264 byte SRAM data buffer. The buffer allows receiving of data while a page in the main memory is being reprogrammed. EEPROM emulation (bit or byte alterability) is easily handled with a self-contained three step Read-Modify-Write operation. Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash uses a single address line serial interface. The AT45DB011B supports single page and block erase operations.
ATMEL ATtiny2313/V Manual
The document introduces the features of ATtiny2313V and ATtiny2313 microcontrollers, including application scenarios, key parameters, power supply voltage, and working frequency.
ATMEL AT24C1024B Manual
AT24C1024B is a 1.048576-bit serial electrically erasable and programmable read only memory (EEPROM) organized as 131,072 words of 8 bits each. Its device's cascadable feature allows up to four devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The device provides 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead TSSOP, 8-ball dBGA2 and 8-lead Ultra Thin SAP packages to save space. In addition, the entire family provides 1.8V (1.8V to 3.6V) and 2.5V (2.5V to 5.5V) versions.
ATMEL AT24C32A/AT24C64A Manual
The AT24C32A/64A is a 32,768/65,536-bit serial electrically erasable and programmable read only memory (EEPROM) organized as 4096/8192 words of 8 bits each and is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential.
ATMEL AT49BV320D/AT49BV320DT Manual
The AT49BV320D(T) is a 2.7V 32-megabit Flash memory organized as 2,097,152 words of 16 bits each. The memory is divided into 71 sectors for erase operations. The device is offered in a 48-lead TSOP package and a 47-ball CBGA package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming. The device powers on in the read mode. Command sequences are used to place the device in other operating modes.
ATMEL AT24C256B Two-wire Serial EEPROM handbook
The AT24C256B is a 256K (32,768 x 8) serial EEPROM that features low voltage and low power consumption. The device has a cascadable feature that allows up to eight devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The devices are available in space-saving 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 8-lead Ultra Thin SAP, 8-lead TSSOP, and 8-ball dBGA2 packages. In addition, the entire family is available in a 1.8V (1.8V to 3.6V) version.
ATMEL AT27C010 Manual
The AT27C010 is a low-power, high-performance 1,048,576-bit one-time programmable read-only memory (OTP EPROM) organized as 128K by 8 bits.
ATMEL 4-megabit 2.7-volt Only Serial Firmware DataFlash Memory AT26F004 Manual
AT26F004 is a serial interface Flash memory device produced by ATMEL company. It is suitable for a wide variety of high-volume consumer applications in which program code is shadowed from flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT26F004, with its erase granularity as small as 4 Kbytes, makes it ideal for data storage as well, eliminating the need for a separate storage device in data storage applications.